UZH-Logo

Maintenance Infos

Geometric validation of TerraSAR-X high-resolution products


Schubert, A; Jehle, M; Small, D; Meier, E (2008). Geometric validation of TerraSAR-X high-resolution products. In: 3rd TerraSAR-X Science Team Meeting, Oberpfaffenhofen, DE, 25 November 2008 - 26 November 2008, 1-6.

Abstract

Switzerland's diversity of flat, rolling and Alpine terrain
makes it ideal territory for geometric validation studies.
Two parallel investigations of TerraSAR-X (TSX) highresolution data were conducted: geometric validation
and estimation of the tropospheric path delay using
measurements of corner reflectors (CRs) placed at different altitudes but nearly identical ranges.
Geometric validation was conducted using products
from the spotlight and stripmap modes in ascending and
descending configurations. The geometric accuracy was
investigated for representative products in two ways:
(1) CR image positions were predicted based on the
delivered product annotations, and these predictions
compared to their measured image positions; (2)Products were geocoded using digital height models (DHMs), and the geocoded images were draped over the height models as well as 1:25’000 digital topographic maps for comparison. Terrain geocoding was performed using a Swiss 25-metre digital terrain model (DTM), as well as a 2-metre digital surface model (DSM) obtained from LIDAR (available for the
Zurich test area).
For the investigation into atmospheric path delay, six
TSX stripmap scenes (30 km x 20 km) containing four
identical CRs with the same range distances at an altitude difference of ~3000 m were examined. The CR arrangement made it possible to verify the TSX nominal path delay correction scheme by comparing predicted slant range with the slant range obtained by measuring the reflector image coordinates. Range differences between the high- and low-altitude reflectors helped quantify small variations in the path delay.

Switzerland's diversity of flat, rolling and Alpine terrain
makes it ideal territory for geometric validation studies.
Two parallel investigations of TerraSAR-X (TSX) highresolution data were conducted: geometric validation
and estimation of the tropospheric path delay using
measurements of corner reflectors (CRs) placed at different altitudes but nearly identical ranges.
Geometric validation was conducted using products
from the spotlight and stripmap modes in ascending and
descending configurations. The geometric accuracy was
investigated for representative products in two ways:
(1) CR image positions were predicted based on the
delivered product annotations, and these predictions
compared to their measured image positions; (2)Products were geocoded using digital height models (DHMs), and the geocoded images were draped over the height models as well as 1:25’000 digital topographic maps for comparison. Terrain geocoding was performed using a Swiss 25-metre digital terrain model (DTM), as well as a 2-metre digital surface model (DSM) obtained from LIDAR (available for the
Zurich test area).
For the investigation into atmospheric path delay, six
TSX stripmap scenes (30 km x 20 km) containing four
identical CRs with the same range distances at an altitude difference of ~3000 m were examined. The CR arrangement made it possible to verify the TSX nominal path delay correction scheme by comparing predicted slant range with the slant range obtained by measuring the reflector image coordinates. Range differences between the high- and low-altitude reflectors helped quantify small variations in the path delay.

Downloads

110 downloads since deposited on 09 Feb 2009
19 downloads since 12 months
Detailed statistics

Additional indexing

Item Type:Conference or Workshop Item (Speech), not refereed, original work
Communities & Collections:07 Faculty of Science > Institute of Geography
Dewey Decimal Classification:910 Geography & travel
Language:English
Event End Date:26 November 2008
Deposited On:09 Feb 2009 13:25
Last Modified:05 Apr 2016 12:46
Official URL:http://sss.terrasar-x.dlr.de/papers_sci_meet_3/paper/CAL0163_schubert.pdf
Related URLs:http://sss.terrasar-x.dlr.de/cgi-bin/secure/none/h.cgi?page=sci_meet_3_home
Permanent URL: https://doi.org/10.5167/uzh-9345

Download

[img]
Preview
Filetype: PDF
Size: 1MB

TrendTerms

TrendTerms displays relevant terms of the abstract of this publication and related documents on a map. The terms and their relations were extracted from ZORA using word statistics. Their timelines are taken from ZORA as well. The bubble size of a term is proportional to the number of documents where the term occurs. Red, orange, yellow and green colors are used for terms that occur in the current document; red indicates high interlinkedness of a term with other terms, orange, yellow and green decreasing interlinkedness. Blue is used for terms that have a relation with the terms in this document, but occur in other documents.
You can navigate and zoom the map. Mouse-hovering a term displays its timeline, clicking it yields the associated documents.

Author Collaborations