Header

UZH-Logo

Maintenance Infos

Browse by Creators

Navigate back| Up a level
Export as
Number of items: 24.

Wagner, Christina; Stock, Veronika; Merk, Susanne; Schmidlin, Patrick R; Roos, Malgorzata; Eichberger, Marlis; Stawarczyk, Bogna (2018). Retention Load of Telescopic Crowns with Different Taper Angles between Cobalt-Chromium and Polyetheretherketone Made with Three Different Manufacturing Processes Examined by Pull-Off Test. Journal of Prosthodontics, 27(2):162-168.

Stawarczyk, Bogna; Silla, Marek; Roos, Malgorzata; Eichberger, Marlis; Lümkemann, Nina (2017). Bonding behaviour of polyetherketoneketone to methylmethacrylate- and dimethacrylate-based polymers. Journal of Adhesive Dentistry, 19(4):331-338.

Taufall, Simon; Eichberger, Marlis; Schmidlin, Patrick R; Stawarczyk, Bogna (2016). Fracture load and failure types of different veneered polyetheretherketone fixed dental prostheses. Clinical Oral Investigations, 20(9):2493-2500.

Schmidlin, Patrick R; Eichberger, Marlis; Stawarczyk, Bogna (2016). Glycine: A potential coupling agent to bond to helium plasma treated PEEK? Dental Materials, 32(2):305-310.

Schatz, Christine; Strickstrock, Monika; Roos, Malgorzata; Edelhoff, Daniel; Eichberger, Marlis; Zylla, Isabella-Maria; Stawarczyk, Bogna (2016). Influence of specimen preparation and test methods on the flexural strength results of monolithic zirconia materials. Materials, 9(3):180.

Stock, Veronika; Schmidlin, Patrick; Merk, Susanne; Wagner, Christina; Roos, Malgorzata; Eichberger, Marlis; Stawarczyk, Bogna (2016). PEEK primary crowns with cobalt-chromium, zirconia and galvanic secondary crowns with different tapers — a comparison of retention forces. Materials, 9(3):187.

Merk, Susanne; Wagner, Christina; Stock, Veronika; Schmidlin, Patrick; Roos, Malgorzata; Eichberger, Marlis; Stawarczyk, Bogna (2016). Retention Load Values of Telescopic Crowns Made of Y-TZP and CoCr with Y-TZP Secondary Crowns: Impact of Different Taper Angles. Materials, 9(5):354.

Stock, Veronika; Wagner, Christina; Merk, Susanne; Roos, Malgorzata; Schmidlin, Patrick R; Eichberger, Marlis; Stawarczyk, Bogna (2016). Retention force of differently fabricated telescopic PEEK crowns with different tapers. Dental Materials Journal, 35(4):594-600.

Stawarczyk, Bogna; Schmid, Philipp; Roos, Malgorzata; Eichberger, Marlis; Schmidlin, Patrick (2016). Spectrophotometric Evaluation of Polyetheretherketone (PEEK) as a Core Material and a Comparison with Gold Standard Core Materials. Materials, 9(6):491.

Merk, Susanne; Wagner, Christina; Stock, Veronika; Eichberger, Marlis; Schmidlin, Patrick; Roos, Malgorzata; Stawarczyk, Bogna (2016). Suitability of Secondary PEEK Telescopic Crowns on Zirconia Primary Crowns: The Influence of Fabrication Method and Taper. Materials, 9(11):908.

Wimmer, Timea; Huffmann, Anne Mildred Sophie; Eichberger, Marlis; Schmidlin, Patrick R; Stawarczyk, Bogna (2016). Two-body wear rate of PEEK, CAD/CAM resin composite and PMMA: Effect of specimen geometries, antagonist materials and test set-up configuration. Dental Materials, 32(6):e127-e136.

Stawarczyk, Bogna; Thrun, Hadelinde; Eichberger, Marlis; Roos, Malgorzata; Edelhoff, Daniel; Schweiger, Josef; Schmidlin, Patrick R (2015). Effect of different surface pretreatments and adhesives on the load-bearing capacity of veneered 3-unit PEEK FDPs. Journal of Prosthetic Dentistry, 114(5):666-673.

Stawarczyk, Bogna; Eichberger, Marlis; Uhrenbacher, Julia; Wimmer, Timea; Edelhoff, Daniel; Schmidlin, Patrick R (2015). Three-unit reinforced polyetheretherketone composite FDPs: Influence of fabrication method on load-bearing capacity and failure types. Dental Materials Journal, 34(1):7-12.

Keul, Christine; Kohen, Daliah; Eichberger, Marlis; Roos, Malgorzata; Gernet, Wolfgang; Stawarczyk, Bogna (2015). The effect of different pretreatment methods of PMMA-based crowns on the long-term tensile bond strength to dentin abutments. Clinical Oral Investigations, 19(1):35-43.

Wagner, Christina; Stock, Veronika; Merk, Susanne; Schmidlin, Patrick R; Roos, Malgorzata; Eichberger, Marlis; Stawarczyk, Bogna (2015). Comparison of retention forces of different fabrication methods of co-cr crowns: pre-sintered and milled, cast and electroforming secondary crowns with different taper angles. International Journal of Dentistry and Oral Science (IJDOS), S2(003):15-20.

Stawarczyk, Bogna; Teuss, Simona; Eichberger, Marlis; Roos, Malgorzata; Keul, Christine (2015). Retention strength of PMMA/UDMA-based crowns bonded to dentin: impact of different coupling agents for pretreatment. Materials, 8(11):7486-7497.

Stawarczyk, Bogna; Jordan, Peter; Schmidlin, Patrick R; Roos, Malgorzata; Eichberger, Marlis; Gernet, Wolfgang; Keul, Christine (2014). PEEK surface treatment effects on tensile bond strength to veneering resins. Journal of Prosthetic Dentistry, 112(5):1278-1288.

Keul, Christine; Müller-Hahl, Manuel; Eichberger, Marlis; Liebermann, Anja; Roos, Malgorzata; Edelhoff, Daniel; Stawarczyk, Bogna (2014). Impact of different adhesives on work of adhesion between CAD/CAM polymers and resin composite cements. Journal of Dentistry, 42(9):1105-1114.

Wimmer, Timea; Erdelt, Kurt-Jürgen; Eichberger, Marlis; Roos, Malgorzata; Edelhoff, Daniel; Stawarczyk, Bogna (2014). Influence of abutment model materials on the fracture loads of three-unit fixed dental prostheses. Dental Materials Journal, 33(6):717-724.

Stawarczyk, Bogna; Stich, Nicola; Eichberger, Marlis; Edelhoff, Daniel; Roos, Malgorzata; Gernet, Wolfgang; Keul, Christine (2014). Long-term tensile bond strength of differently cemented nanocomposite CAD/CAM crowns on dentin abutment. Dental Materials, 30(3):334-342.

Uhrenbacher, Julia; Schmidlin, Patrick R; Keul, Christine; Eichberger, Marlis; Roos, Malgorzata; Gernet, Wolfgang; Stawarczyk, Bogna (2014). The effect of surface modification on the retention strength of polyetheretherketone crowns adhesively bonded to dentin abutments. Journal of Prosthetic Dentistry, 112(6):1489-1497.

Sproesser, Oliver; Schmidlin, Patrick R; Uhrenbacher, Julia; Eichberger, Marlis; Roos, Malgorzata; Stawarczyk, Bogna (2014). Work of adhesion between resin composite cements and PEEK as a function of etching duration with sulfuric acid and its correlation with bond strength values. International Journal of Adhesion and Adhesives, 54:184-190.

Bähr, Nora; Keul, Christine; Edelhoff, Daniel; Eichberger, Marlis; Roos, Malgorzata; Gernet, Wolfgang; Stawarczyk, Bogna (2013). Effect of different adhesives combined with two resin composite cements on shear bond strength to polymeric CAD/CAM materials. Dental Materials Journal, 32(3):492-501.

Liebermann, Anja; Keul, Christine; Bähr, Nora; Edelhoff, Daniel; Eichberger, Marlis; Roos, Malgorzata; Stawarczyk, Bogna (2013). Impact of plasma treatment of PMMA-based CAD/CAM blanks on surface properties as well as on adhesion to self-adhesive resin composite cements. Dental Materials, 29(9):935-944.

This list was generated on Sat Feb 24 05:32:38 2018 CET.