Abstract
This analytical method is a validated measurement procedure for the determination of 1,2-dichloroethane [107-06-2] after personal or stationary sampling. Sampling is performed by drawing a defined volume of air through an adsorption tube made of stainless steel packed with Chromosorb 106 using a suitable flow-regulated pump. After thermal desorption, the 1,2-dichloroethane retained on the adsorbens is analysed using gas chromatography with flame ionisation detection and mass spectrometry. The relative limit of quantification (LOQ) is 0.009 mg 1,2-dichloroethane/m3 for an air sample volume of 1.2 l. The mean recovery for 1,2-dichloroethane was 101%. The concentration-dependent expanded uncertainty was 20% to 21%. This analytical method has been accredited by the accident insurance companies for the detection in workplace air of substances that are carcinogenic, mutagenic or toxic to reproduction. This method has been tested and recommended for the determination of 1,2-dichloroethane in work areas by the German Social Accident Insurance (DGUV). Both personal and stationary sampling can be performed for measurements in order to evaluate work areas.
Tschickardt, M