Header

UZH-Logo

Maintenance Infos

Browse by Creators

Navigate back| Up a level
Export as
Number of items: 29.

Zimmermann, Moritz; Ender, Andreas; Egli, Gustav; Özcan, Mutlu; Mehl, Albert (2019). Fracture load of CAD/CAM-fabricated and 3D-printed composite crowns as a function of material thickness. Clinical Oral Investigations, 23(6):2777-2784.

Zimmermann, Moritz; Valcanaia, Andre; Neiva, Gisele; Mehl, Albert; Fasbinder, Dennis (2019). Three-Dimensional Digital Evaluation of the Fit of Endocrowns Fabricated from Different CAD/CAM Materials. Journal of Prosthodontics, 28(2):e504-e509.

Zimmermann, Moritz; Koller, Christina; Reymus, Marcel; Mehl, Albert; Hickel, Reinhard (2018). Clinical evaluation of indirect particle-filled composite resin CAD/CAM partial crowns after 24 months. Journal of Prosthodontics, 27(8):694-699.

Zimmermann, Moritz; Mehl, Albert (2018). Werkstoffkunde in der Zahnmedizin- Moderne Materialien und Technologien. In: Rosentritt, Martin; Ilie, Nicoleta; Lohbauer, Ulrich. Werkstoffkunde in der Zahnmedizin : moderne Materialien und Technologien. Deutschland: Georg Thieme Verlag, 425-442.

Mehl, Albert (2018). 'Simplification-itis' and scientific accuracy. International Journal of Computerized Dentistry, 21(21):275-276.

Mehl, Albert (2018). Hinge axis determination of the temporomandibular joint and its interpretation: what do we really measure? International Journal of Computerized Dentistry, 21(21):295-303.

Mehl, Albert (2018). The determination of the terminal hinge axis: a fundamental review and comparison of known and novel methods. International Journal of Computerized Dentistry, 21(3):201-214.

Zimmermann, Moritz; Valcanaia, Andre; Neiva, Gisele; Mehl, Albert; Fasbinder, Dennis (2017). Digital evaluation of the fit of zirconia-reinforced lithium silicate crowns with a new three-dimensional approach. Quintessence International:9-15.

Dietrich, Christian Andreas; Ender, Andreas; Baumgartner, Stefan; Mehl, Albert (2017). A validation study of reconstructed rapid prototyping models produced by two technologies. Angle Orthodontist, 87(5):782-787.

Srinivasan, Murali; Cantin, Yoann; Mehl, Albert; Gjengedal, Harald; Müller, Frauke; Schimmel, Martin (2017). CAD/CAM milled removable complete dentures: an in vitro evaluation of trueness. Clinical Oral Investigations, 21(6):2007-2019.

Zimmermann, Moritz; Koller, Christina; Mehl, Albert; Kühnisch, Jan; Hickel, Reinhard (2017). CAD/CAM-Restaurationen aus hochgefülltem Komposit: erste klinische Ergebnisse nach 12 Monaten. Deutsche Zahnärztliche Zeitschrift, 72:252.

Zaruba, Markus; Mehl, Albert (2017). Chairside systems: a current review. International Journal of Computerized Dentistry, 20(2):123-149.

Mehl, Albert; Bosch, Gabriel; Fischer, Carolin; Ender, Andreas (2017). In vivo tooth-color measurement with a new 3D intraoral scanning system in comparison to conventional digital and visual color determination methods. International Journal of Computerized Dentistry, 20(4):343-361.

Zimmermann, Moritz; Koller, Christina; Mehl, Albert; Hickel, Reinhard (2017). Indirect zirconia-reinforced lithium silicate ceramic CAD/CAM restorations: Preliminary clinical results after 12 months. Quintessence International, 48(1):19-25.

Zimmermann, Moritz; Egli, Gustav Hans; Zaruba, Markus; Mehl, Albert (2017). Influence of material thickness on fractural strength of CAD/CAM fabricated ceramic crowns. Dental Materials Journal, 36(6):778-783.

Zimmermann, Moritz; Koller, Christina; Rumetsch, Moritz; Ender, Andreas; Mehl, Albert (2017). Precision of guided scanning procedures for full-arch digital impressions in vivo. Journal of Orofacial Orthopedics = Fortschritte Der Kieferorthopädie, 78(6):466-471.

Ender, Andreas; Bienz, Stefan; Mörmann, Werner; Mehl, Albert; Attin, Thomas; Stawarczyk, Bogna (2016). Marginal adaptation, fracture load and macroscopic failure mode of adhesively luted PMMA-based CAD/CAM inlays. Dental Materials, 32(2):e22-e29.

Ender, Andreas; Zimmermann, Moritz; Attin, Thomas; Mehl, Albert (2016). In vivo precision of conventional and digital methods for obtaining quadrant dental impressions. Clinical Oral Investigations, 20(7):1495-1504.

Zimmermann, Moritz; Mehl, Albert; Mörmann, Werner H; Reich, Sven (2016). Intraoralscanner: eine aktuelle Übersicht. Kieferorthopädie, 30(1):37-53.

Ender, Andreas; Attin, Thomas; Mehl, Albert (2016). In vivo precision of conventional and digital methods of obtaining complete-arch dental impressions. Journal of Prosthetic Dentistry, 115(3):313-320.

Kurz, Michael; Attin, Thomas; Mehl, Albert (2015). Influence of material surface on the scanning error of a powder-free 3D measuring system. Clinical Oral Investigations, 19(8):2035-2043.

Bosch, Gabriel; Ender, Andreas; Mehl, Albert (2015). Non- and minimally invasive full-mouth rehabilitation of patients with loss of vertical dimension of occlusion using CAD/CAM: an innovative concept demonstrated with a case report. International Journal of Computerized Dentistry, 18(3):273-286.

Attin, Thomas; Bosch, Gabriel; Wegehaupt, Florian J; Mehl, Albert; Wiegand, Annette; Blunck, Uwe (2015). Rekonstruktion erosiver Zahnhartsubstanzdefekte mit Komposit. Die Quintessenz, 66(9):1055-1069.

Grohmann, Philipp; Bindl, Andreas; Hämmerle, Christoph; Mehl, Albert; Sailer, Irena (2015). Three-unit posterior zirconia-ceramic fixed dental prostheses (FDPs) veneered with layered and milled (CAD-on) veneering ceramics: 1-year follow-up of a randomized controlled clinical trial. Quintessence International, 46(10):871-880.

Zimmermann, Moritz; Mehl, Albert (2015). Virtual smile design systems: a current review. International Journal of Computerized Dentistry, 18(4):303-317.

Bosch, Gabriel; Ender, Andreas; Mehl, Albert (2014). A 3-dimensional accuracy analysis of chairside CAD/CAM milling processes. Journal of Prosthetic Dentistry, 112(6):1425-1431.

Ender, Andreas; Mehl, Albert (2014). Accuracy in dental medicine, a new way to measure trueness and precision. Journal of Visualized Experiments, (86):e51374.

Ender, Andreas; Mehl, Albert (2013). Accuracy of complete-arch dental impressions: a new method of measuring trueness and precision. Journal of Prosthetic Dentistry, 109(2):121-128.

Hallmann, Lubica; Mehl, Albert; Sereno, Nuno; Hämmerle, Christoph H F (2012). The improvement of adhesive properties of PEEK through different pre-treatments. Applied Surface Science, 258(18):7213-7218.

This list was generated on Tue May 21 01:31:13 2019 CEST.