Header

UZH-Logo

Maintenance Infos

Browse by Scopus Subject Areas

Navigate back| Up a level
Export as
Number of items at this level: 273.

2020

Ioannidis, A; Bomze, D; Hämmerle, C H F; Hüsler, J; Birrer, O; Mühlemann, S (2020). Load-bearing capacity of CAD/CAM 3D-printed zirconia, CAD/CAM milled zirconia, and heat-pressed lithium disilicate ultra-thin occlusal veneers on molars. Dental Materials, 36(4):e109-e116.

Hajduk, Hennes; Kuzmin, Dmitri; Kolev, Tzanio; Abgrall, Rémi (2020). Matrix-free subcell residual distribution for Bernstein finite element discretizations of linear advection equations. Computer Methods in Applied Mechanics and Engineering, 359:112658.

Bernard, Carlo; Cun, Huanyao; Greber, Thomas; Hemmi, Adrian; Miniussi, Elisa; et al (2020). Production and processing of graphene and related materials. 2D Materials, 7(2):022001.

Robotti, Francesco; Sterner, Ita; Bottan, Simone; Monné Rodríguez, Josep M; Pellegrini, Giovanni; Schmidt, Tanja; Falk, Volkmar; Poulikakos, Dimos; Ferrari, Aldo; Starck, Christoph (2020). Microengineered biosynthesized cellulose as anti-fibrotic in vivo protection for cardiac implantable electronic devices. Biomaterials, 229:119583.

2019

Evrova, Olivera; Bürgisser, Gabriella Meier; Ebnöther, Christian; Adathala, Ashal; Calcagni, Maurizio; Bachmann, Elias; Snedeker, Jess G; Scalera, Chiara; Giovanoli, Pietro; Vogel, Viola; Buschmann, Johanna (2019). Elastic and surgeon friendly electrospun tubes delivering PDGF-BB positively impact tendon rupture healing in a rabbit Achilles tendon model. Biomaterials, 232:119722.

Rezaeian, Zahra; Beigi-Boroujeni, Saeed; Atai, Mohammad; Ebrahimibagha, Mehrnoosh; Özcan, Mutlu (2019). A novel thymol-doped enamel bonding system: Physico-mechanical properties, bonding strength, and biological activity. Journal of the Mechanical Behavior of Biomedical Materials, 100:103378.

Dal Piva, Amanda M O; Tribst, João P M; Saavedra, Guilherme S F A; Souza, Rodrigo O A; de Melo, Renata M; Borges, Alexandre L S; Özcan, Mutlu (2019). Short communication: Influence of retainer configuration and loading direction on the stress distribution of lithium disilicate resin-bonded fixed dental prostheses: 3D finite element analysis. Journal of the Mechanical Behavior of Biomedical Materials, 100:103389.

Mumcu, Emre; Erdemir, Ugur; Özsoy, Alev; Tekbas-Atay, Meltem; Özcan, Mutlu (2019). Effect of surface conditioning methods on the microtensile bond strength of repair composite to indirect restorative materials. Journal of Adhesion Science and Technology, 33(21):2369-2384.

Schneider, Isabelle; Baumgartner, Walter; Gröninger, Olivier; Stark, Wendelin J; Märsmann, Sonja; Calcagni, Maurizio; Cinelli, Paolo; Wolint, Petra; Buschmann, Johanna (2019). 3D microtissue–derived human stem cells seeded on electrospun nanocomposites under shear stress: Modulation of gene expression. Journal of the Mechanical Behavior of Biomedical Materials, 102:103481.

Januário, Ana Beatriz do Nascimento; Moura, Dayanne Monielle Duarte; Araújo, Arthur Magno Medeiros de; Dal Piva, Amanda Maria de Oliveira; Özcan, Mutlu; Bottino, Marco Antonio; Souza, Rodrigo Othávio Assunção (2019). Effect of temporary cement removal methods from human dentin on zirconia-dentin adhesion. Journal of Adhesion Science and Technology, 33(19):2112-2127.

Papageorgiou, Panagiota; Vallmajo-Martin, Queralt; Kisielow, Malgorzata; Sancho-Puchades, Alejandro; Kleiner, Esther; Ehrbar, Martin (2019). Expanded skeletal stem and progenitor cells promote and participate in induced bone regeneration at subcritical BMP-2 dose. Biomaterials, 217:119278.

Kelch, Matthias; Schulz, Julian; Edelhoff, Daniel; Sener, Beatrice; Stawarczyk, Bogna (2019). Impact of different pretreatments and aging procedures on the flexural strength and phase structure of zirconia ceramics. Dental Materials, 35(10):1439-1449.

Kümbüloğlu, Övül; Yildirim, Bengisu; Al-Haj Husain, Nadin; Özcan, Mutlu (2019). Adhesion potential of relining materials to polyamide and PMMA-based denture base materials: effect of surface conditioning methods. Journal of Adhesion Science and Technology, 33(17):1939-1947.

Massi Paschoalino, Vivian; Juste Paschoalino, Bruno; Özcan, Mutlu; Luis Almeida de Carvalho, Ronaldo; de Carvalho, Rodrigo Furtado; Al-Haj Husain, Nadin; Pessoa Pereira Leite, Fabiola (2019). Effect of different air-abrasion protocols on topography, surface wettability and adhesion of MDP monomer-based resin cement to zirconia. Journal of Adhesion Science and Technology, 33(17):1948-1958.

Eyüboğlu, Tan Fırat; Olcay, Keziban; Özcan, Mutlu (2019). Effects of chemical and physico-chemical surface conditioning methods on the adhesion of resin composite to different mineral trioxide aggregate based cements. Journal of Adhesion Science and Technology, 33(16):1836-1845.

Schwendimann, Anita; Özcan, Mutlu (2019). Fatigue and fracture resistance of minimally invasive ceramic and resin composite veneers with different designs bonded adhesively to severely eroded teeth. Journal of Adhesion Science and Technology, 33(15):1715-1728.

Tribst, João Paulo M; Dal Piva, Amanda M O; de Melo, Renata M; Borges, Alexandre L S; Bottino, Marco Antonio; Özcan, Mutlu (2019). Short communication: Influence of restorative material and cement on the stress distribution of posterior resin-bonded fixed dental prostheses: 3D finite element analysis. Journal of the Mechanical Behavior of Biomedical Materials, 96:279-284.

Ma, KeYuan; Lago, Jorge; von Rohr, Fabian O (2019). Superconductivity in the η-carbide-type oxides Zr4Rh2Ox. Journal of Alloys and Compounds, 796:287-292.

Mangione, Elisabetta; Özcan, Mutlu (2019). Adhesion of resin cements to contaminated zirconia resin cements on zirconia: effect saliva-contamination and surface conditioning. Journal of Adhesion Science and Technology, 33(14):1572-1583.

Torre, Olivia M; Evashwick-Rogler, Thomas W; Nasser, Phillip; Iatridis, James C (2019). Biomechanical test protocols to detect minor injury effects in intervertebral discs. Journal of the Mechanical Behavior of Biomedical Materials, 95:13-20.

Maeder, Mila; Pasic, Pavla; Ender, Adreas; Özcan, Mutlu; Benic, Goran I; Ioannidis, Alexis (2019). Load-bearing capacities of ultra-thin occlusal veneers bonded to dentin. Journal of the Mechanical Behavior of Biomedical Materials, 95:165-171.

Gresnigt, Marco M M; Cune, Marco S; Schuitemaker, Julia; van der Made, Stephan A M; Meisberger, Eric W; Magne, Pascal; Özcan, Mutlu (2019). Performance of ceramic laminate veneers with immediate dentine sealing: An 11 year prospective clinical trial. Dental Materials, 35(7):1042-1052.

Miranda, Jean Soares; de Carvalho, Ronaldo Luís Almeida; de Carvalho, Rodrigo Furtado; Borges, Alexandre Luis S; Bottino, Marco Antônio; Özcan, Mutlu; Melo, Renata Marques de; Souza, Rodrigo Othávio de Assunção e (2019). Effect of different loading pistons on stress distribution of a CAD/CAM silica-based ceramic: CAD-FEA modeling and fatigue survival analysis. Journal of the Mechanical Behavior of Biomedical Materials, 94:207-212.

Franz, Martin; Özcan, Mutlu (2019). Adhesion of bulk-fill resin composites as core and intraradicular post materials only versus the use of glass-fiber posts in different regions of root dentin. Journal of Adhesion Science and Technology, 33(13):1410-1425.

Saddiqi, Naeem‐ul‐Hasan; Seeger, Stefan (2019). Chemically Resistant, Electric Conductive, and Superhydrophobic Coatings. Advanced Materials Interfaces, 6(7):1900041.

Pané, Salvador; Puigmartí-Luis, Josep; Bergeles, Christos; Chen, Xiang-Zhong; Pellicer, Eva; Sort, Jordi; Počepcová, Vanda; Ferreira, Antoine; Nelson, Bradley J (2019). Imaging Technologies for Biomedical Micro‐ and Nanoswimmers. Advanced Materials Technologies, 4(4):1800575.

Luber, Sandra (2019). Recent progress in computational exploration and design of functional materials. Computational Materials Science, 161:127-134.

Evrova, Olivera. Bioactive, elastic electrospun tubes to improve the healing of ruptured tendons. 2019, ETH Zurich.

Wachtel, Andreas; Zimmermann, Tycho; Sütel, Mona; Adali, Ufuk; Abou-Emara, Mohamad; Müller, Wolf-Dieter; Mühlemann, Sven; Schwitalla, Andreas Dominik (2019). Bacterial leakage and bending moments of screw-retained, composite-veneered PEEK implant crowns. Journal of the Mechanical Behavior of Biomedical Materials, 91:32-37.

Helbling, Fabienne; Özcan, Mutlu (2019). Adhesion of resin cement to contemporary hybrid ceramic and polymeric CAD/CAM materials: effect of conditioning methods and ageing. Journal of Adhesion Science and Technology, 33(8):886-902.

Martín-Martínez, José Miguel; Özcan, Mutlu; Sernek, Milan (2019). Editorial. Journal of Adhesion Science and Technology, 33(1):1.

Yildirim, Bengisu; Kümbüloğlu, Övül; Saraçoğlu, Ahmet; Al-Haj Husain, Nadin; Özcan, Mutlu (2019). An investigation of atomic force microscopy, surface topography and adhesion of luting cements to zirconia: effect of silica coating, zirconia primer and laser. Journal of Adhesion Science and Technology, 33(18):2047-2060.

2018

Abgrall, Rémi; Crisovan, R (2018). Model reduction using $L^1$ -norm minimization as an application to nonlinear hyperbolic problems. International Journal for Numerical Methods in Fluids, 87(12):628-651.

Moura, Dayanne Monielle Duarte; do Nascimento Januário, Ana Beatriz; de Araújo, Arthur Magno Medeiros; de Oliveira Dal Piva, Amanda Maria; Özcan, Mutlu; Bottino, Marco Antonio; Souza, Rodrigo Othávio Assunção (2018). Effect of primer-cement systems with different functional phosphate monomers on the adhesion of zirconia to dentin. Journal of the Mechanical Behavior of Biomedical Materials, 88:69-77.

Chang, Guoqing; Wieder, Benjamin J; Schindler, Frank; Sanchez, Daniel S; Belopolski, Ilya; Huang, Shin-Ming; Singh, Bahadur; Wu, Di; Chang, Tay-Rong; Neupert, Titus; Xu, Su-Yang; Lin, Hsin; Hasan, M Zahid (2018). Topological quantum properties of chiral crystals. Nature Materials, 17(11):978-985.

Korkut, Emre; Tulumbacı, Fatih; Gezgin, Onur; Özer, Hazal; Özcan, Mutlu (2018). Evaluation of temperature changes in the pulp chamber during polymerization of pulp capping materials. Journal of Adhesion Science and Technology, 32(20):2244-2253.

Brivio, S; Conti, D; Nair, M V; Frascaroli, J; Covi, E; Ricciardi, C; Indiveri, G; Spiga, S (2018). Extended memory lifetime in spiking neural networks employing memristive synapses with nonlinear conductance dynamics. Nanotechnology, 30(1):015102.

Broguiere, Nicolas; Isenmann, Luca; Hirt, Christian; Ringel, Till; Placzek, Silja; Cavalli, Emma; Ringnalda, Femke; Villiger, Lukas; Züllig, Richard; Lehmann, Roger; Rogler, Gerhard; Heim, Markus H; Schüler, Julia; Zenobi-Wong, Marcy; Schwank, Gerald (2018). Growth of Epithelial Organoids in a Defined Hydrogel. Advanced Materials, 30(43):e1801621.

Grau, Alexander; Stawarczyk, Bogna; Roos, Malgorzata; Theelke, Björn; Hampe, Rüdiger (2018). Reliability of wear measurements of CAD-CAM restorative materials after artificial aging in a mastication simulator. Journal of the Mechanical Behavior of Biomedical Materials, 86:185-190.

Hampe, Rüdiger; Lümkemann, Nina; Sener, Beatrice; Stawarczyk, Bogna (2018). The effect of artificial aging on Martens hardness and indentation modulus of different dental CAD/CAM restorative materials. Journal of the Mechanical Behavior of Biomedical Materials, 86:191-198.

Ioannidis, Alexis; Mühlemann, Sven; Özcan, Mutlu; Hüsler, Jürg; Hämmerle, Christoph H F; Benic, Goran I (2018). Ultra-thin occlusal veneers bonded to enamel and made of ceramic or hybrid materials exhibit load-bearing capacities not different from conventional restorations. Journal of the Mechanical Behavior of Biomedical Materials, 90:433-440.

Han, Hana; Martinez, Vincent; Aebersold, Mathias J; Lüchtefeld, Ines; Polesel-Maris, Jérôme; Vörös, János; Zambelli, Tomaso (2018). Force controlled SU-8 micropipettes fabricated with a sideways process. Journal of Micromechanics and Microengineering, 28(9):095015.

Chakroun, Firas; Colombo, Vera; Lie Sam Foek, Dave; Gallo, Luigi Maria; Feilzer, Albert; Özcan, Mutlu (2018). Displacement of teeth without and with bonded fixed orthodontic retainers: 3D analysis using triangular target frames and optoelectronic motion tracking device. Journal of the Mechanical Behavior of Biomedical Materials, 85:175-180.

Agingu, Check; Zhang, Chang-yuan; Jiang, Neng-wu; Cheng, Hui; Özcan, Mutlu; Yu, Hao (2018). Intraoral repair of chipped or fractured veneered zirconia crowns and fixed dental prosthesis: clinical guidelines based on literature review. Journal of Adhesion Science and Technology, 32(15):1711-1723.

Zea Escamilla, Edwin; Archila, Hector; Kaminski, Sebastian; Trujillo, David; Harries, Kent A (2018). Bamboo reinforced concrete – a critical review. Materials and structures, 51:102.

Stüdle, Chiara; Vallmajó-Martín, Queralt; Haumer, Alexander; Guerrero, Julien; Centola, Matteo; Mehrkens, Arne; Schaefer, Dirk J; Ehrbar, Martin; Barbero, Andrea; Martin, Ivan (2018). Spatially confined induction of endochondral ossification by functionalized hydrogels for ectopic engineering of osteochondral tissues. Biomaterials, 171:219-229.

Gul, Pinar; Turel, Verda; Akgul, Nilgun; Ozcan, Mutlu (2018). Comparison of the translucency of two multishaded composite resins polymerized with direct or indirect method. Journal of Adhesion Science and Technology, 32(11):1165-1175.

Ernst, Oliver; Müller, Pascal; Özcan, Mutlu (2018). Load bearing capacity of minimal invasive direct and indirect veneers bonded to maxillary incisors with severe wear: effect of preparation design and material type. Journal of Adhesion Science and Technology, 32(11):1151-1164.

Chantre, Christophe O; Campbell, Patrick H; Golecki, Holly M; Buganza, Adrian T; Capulli, Andrew K; Deravi, Leila F; Dauth, Stephanie; Sheehy, Sean P; Paten, Jeffrey A; Gledhill, Karl; Doucet, Yanne S; Abaci, Hasan E; Ahn, Seungkuk; Pope, Benjamin D; Ruberti, Jeffrey W; Hoerstrup, Simon P; Christiano, Angela M; Parker, Kevin Kit (2018). Production-scale fibronectin nanofibers promote wound closure and tissue repair in a dermal mouse model. Biomaterials, 166:96-108.

Baumgartner, Walter; Schneider, Isabelle; Hess, Samuel C; Stark, Wendelin J; Märsmann, Sonja; Brunelli, Marzia; Calcagni, Maurizio; Cinelli, Paolo; Buschmann, Johanna (2018). Cyclic uniaxial compression of human stem cells seeded on a bone biomimetic nanocomposite decreases anti-osteogenic commitment evoked by shear stress. Journal of the Mechanical Behavior of Biomedical Materials, 83:84-93.

Augusti, Davide; Re, Dino; Özcan, Mutlu; Augusti, Gabriele (2018). Removal of temporary cements following an immediate dentin hybridization approach: a comparison of mechanical and chemical methods for substrate cleaning. Journal of Adhesion Science and Technology, 32(7):693-704.

Tybrandt, Klas; Khodagholy, Dion; Dielacher, Bernd; Stauffer, Flurin; Renz, Aline F; Buzsáki, György; Vörös, János (2018). High-Density Stretchable Electrode Grids for Chronic Neural Recording. Advanced Materials, 30(15):1706520.

Dudli, S; Enns-Bray, W; Pauchard, Y; Römmeler, A; Fields, A J; Ferguson, S J; Helgason, B (2018). Larger vertebral endplate concavities cause higher failure load and work at failure under high-rate impact loading of rabbit spinal explants. Journal of the Mechanical Behavior of Biomedical Materials, 80:104-110.

Ntasi, Argyro; Al Jabbari, Youssef S; Silikas, Nick; Eliades, Theodore; Zinelis, Spiros (2018). Multitechnique characterization of conventional and experimental Ag-based brazing alloys for orthodontic applications. Dental Materials, 34(3):e25-e35.

Bracher, Lukas; Özcan, Mutlu (2018). Adhesion of resin composite to enamel and dentin: a methodological assessment. Journal of Adhesion Science and Technology, 32(3):258-271.

Mallone, Anna; Stenger, Chantal; Von Eckardstein, Arnold; Hoerstrup, Simon P; Weber, Benedikt (2018). Biofabricating atherosclerotic plaques: In vitro engineering of a three-dimensional human fibroatheroma model. Biomaterials, 150:49-59.

Hingsammer, Lukas; Grillenberger, Markus; Schagerl, Martin; Malek, Michael; Hunger, Stefan (2018). Biomechanical testing of zirconium dioxide osteosynthesis system for Le Fort I advancement osteotomy fixation. Journal of the Mechanical Behavior of Biomedical Materials, 77:34-39.

2017

Gresnigt, Marco M M; Özcan, Mutlu; Carvalho, Marco; Lazari, Priscilla; Cune, Marco S; Razavi, Peywand; Magne, Pascal (2017). Effect of luting agent on the load to failure and accelerated-fatigue resistance of lithium disilicate laminate veneers. Dental Materials, 33(12):1392-1401.

Pensalfini, Marco; Weickenmeier, Johannes; Rominger, Marga; Santoprete, Roberto; Distler, Oliver; Mazza, Edoardo (2017). Location-specific mechanical response and morphology of facial soft tissues. Journal of the Mechanical Behavior of Biomedical Materials, 78:108-115.

Rizk, Marta; Hohlfeld, Lisa; Thanh, Loan Tao; Biehl, Ralf; Lühmann, Nicole; Mohn, Dirk; Wiegand, Annette (2017). Bioactivity and properties of a dental adhesive functionalized with polyhedral oligomeric silsesquioxanes (POSS) and bioactive glass. Dental Materials, 33(9):1056-1065.

van den Breemer, Carline R G; Özcan, Mutlu; Cune, Marco S; van der Giezen, Rianne; Kerdijk, Wouter; Gresnigt, Marco M M (2017). Effect of immediate dentine sealing on the fracture strength of lithium disilicate and multiphase resin composite inlay restorations. Journal of the Mechanical Behavior of Biomedical Materials, 72:102-109.

Vallittu, Pekka K; Shinya, Akikazu; Baraba, Anja; Kerr, Ian; Keulemans, Filip; Kreulen, Cees; Lassila, Lippo; Malmstrom, Hans; Novotny, Rudolf; Peumans, Marleen; Van Rensburg, Jansie; Wolff, Diana; Özcan, Mutlu (2017). Fiber-reinforced composites in fixed prosthodontics-Quo vadis? Dental Materials, 33(8):877-879.

Tauböck, Tobias T; Marovic, Danijela; Zeljezic, Davor; Steingruber, Andrea D; Attin, Thomas; Tarle, Zrinka (2017). Genotoxic potential of dental bulk-fill resin composites. Dental Materials, 33(7):788-795.

Capulli, Andrew K; Emmert, Maximillian Y; Pasqualini, Francesco S; Kehl, Debora; Caliskan, Etem; Lind, Johan U; Sheehy, Sean P; Park, Sung Jin; Ahn, Seungkuk; Weber, Benedikt; Goss, Josue A; Hoerstrup, Simon P; Parker, Kevin Kit (2017). JetValve: Rapid manufacturing of biohybrid scaffolds for biomimetic heart valve replacement. Biomaterials, 133:229-241.

Annousaki, Olga; Zinelis, S; Eliades, G; Eliades, T (2017). Comparative analysis of the mechanical properties of fiber and stainless steel multistranded wires used for lingual fixed retention. Dental Materials, 33(5):e205-e211.

Kluin, Jolanda; Talacua, Hanna; Smits, Anthal I P M; Emmert, Maximilian Y; Brugmans, Marieke C P; Fioretta, Emanuela S; Dijkman, Petra E; Söntjens, Serge H M; Duijvelshoff, Renée; Dekker, Sylvia; Janssen-van den Broek, Marloes W J T; Lintas, Valentina; Vink, Aryan; Hoerstrup, Simon P; Janssen, Henk M; Dankers, Patricia Y W; Baaijens, Frank P T; Bouten, Carlijn V C (2017). In situ heart valve tissue engineering using a bioresorbable elastomeric implant - From material design to 12 months follow-up in sheep. Biomaterials, 125:101-117.

Emmert, Maximilian Y; Wolint, Petra; Jakab, Andras; Sheehy, Sean P; Pasqualini, Francesco S; Nguyen, Thi Dan Linh; Hilbe, Monika; Seifert, Burkhardt; Weber, Benedikt; Brokopp, Chad E; Macejovska, Dominika; Caliskan, Etem; von Eckardstein, Arnold; Schwartlander, Ruth; Vogel, Viola; Falk, Volkmar; Parker, Kevin Kit; Gyöngyösi, Mariann; Hoerstrup, Simon P (2017). Safety and efficacy of cardiopoietic stem cells in the treatment of post-infarction left-ventricular dysfunction - from cardioprotection to functional repair in a translational pig infarction model. Biomaterials, 122:48-62.

Benke, Stephan; Nettels, Daniel; Hofmann, Hagen; Schuler, Benjamin (2017). Quantifying kinetics from time series of single-molecule Förster resonance energy transfer efficiency histograms. Nanotechnology, 28(11):114002.

Papadogiannis, Dimitris; Iliadi, Anna; Bradley, T Gerard; Silikas, Nikolaos; Eliades, George; Eliades, Theodore (2017). Viscoelastic properties of orthodontic adhesives used for lingual fixed retainer bonding. Dental Materials, 33(1):e22-e27.

Toz, Tuğba; Kiremitçi, Arlin; Sera Çakmak, Anıl; Ünsal Tan, Oya; Palaska, Erhan; Gümüşderelioğlu, Menemşe; Özcan, Mutlu (2017). A comparative study on monomer elution and cytotoxicity of different adhesive restoration materials. Journal of Adhesion Science and Technology, 31(4):414-429.

Armstrong, Steve; Breschi, Lorenzo; Özcan, Mutlu; Pfefferkorn, Frank; Ferrari, Marco; Van Meerbeek, Bart (2017). Academy of Dental Materials guidance on in vitro testing of dental composite bonding effectiveness to dentin/enamel using micro-tensile bond strength (μTBS) approach. Dental Materials, 33(2):133-143.

Martín-Martínez, José Miguel; Sernek, Milan; Özcan, Mutlu (2017). Adhesion in numerous disciplines. Journal of Adhesion Science and Technology, 31(5):465.

Al-Dwairi, Ziad Nawaf; Aleisa, Khalil; Al-Beshr, Abdulhameed; Al-Habdan, Yazeed; Al-Harbi, Faisal; Al-Haj Husain, Nadin; Özcan, Mutlu (2017). Adhesion of cast metal alloy and lithium disilicate copings luted to different core build-up materials with self-adhesive resin cement. Journal of Adhesion Science and Technology, 31(3):242-249.

Cilingir, Aylin; Bilhan, Hakan; Cilingir, Altug; Gomec, Yavuz; Özcan, Mutlu (2017). Adhesion of conventional and self-adhesive resin cements to indirect resin composite using different surface conditioning methods. Journal of Adhesion Science and Technology, 31(4):358-368.

Rebholz-Zaribaf, Nasanin; Özcan, Mutlu (2017). Adhesion to zirconia as a function of primers/silane coupling agents, luting cement types, aging and test methods. Journal of Adhesion Science and Technology, 31(13):1408-1421.

Cohrs, Nicholas H; Schulz-Schönhagen, Konstantin; Jenny, Florian; Mohn, Dirk; Stark, Wendelin J (2017). Bioactive glass containing silicone composites for left ventricular assist device drivelines: role of Bioglass 45S5® particle size on mechanical properties and cytocompatibility. Journal of Materials Science, 52(15):9023-9038.

Annousaki, Olga. Comparative analysis of the mechanical properties of fiber and stainless steel multistranded wires used for lingual fixed retention. 2017, University of Zurich, Faculty of Medicine.

Scholtanus, Johannes Durk; Zaia, John; Özcan, Mutlu (2017). Compressive strength and failure types of cusp replacing direct resin composite restorations in previously amalgam-filled premolars versus sound teeth. Journal of Adhesion Science and Technology, 31(2):211-218.

Koc-Dundar, Bilgin; Özcan, Mutlu (2017). Effect of clinical and laboratory contamination media on the adhesion of luting cement to direct and indirect resin composite materials. Journal of Adhesion Science and Technology, 31(11):1251-1263.

Sener-Yamaner, Işıl Damla; Sertgöz, Atilla; Toz-Akalın, Tugba; Özcan, Mutlu (2017). Effect of material and fabrication technique on marginal fit and fracture resistance of adhesively luted inlays made of CAD/CAM ceramics and hybrid materials. Journal of Adhesion Science and Technology, 31(1):55-70.

Spadacini, Alessandro; Barabanti, Nicola; Baldi, Francesco; Özcan, Mutlu; Cerutti, Antonio (2017). Effect of shade and thermo-mechanical viscosity stimulation methods on the rheological properties of nanohybrid resin composite. Journal of Adhesion Science and Technology, 31(1):100-108.

Pensalfini, Marco; Ehret, Alexander E; Stüdeli, Silvia; Marino, Daniela; Kaech, Andres; Reichmann, Ernst; Mazza, Edoardo (2017). Factors affecting the mechanical behavior of collagen hydrogels for skin tissue engineering. Journal of the Mechanical Behavior of Biomedical Materials, 69:85-97.

Sener-Yamaner, Isıl Damla; Ekici, Bülent; Sertgöz, Atilla; Yuzbasioglu, Emir; Özcan, Mutlu (2017). Finite element analysis on the optimal material choice and cavity design parameters for MOD inlays exposed to different force vectors and magnitudes. Journal of Adhesion Science and Technology, 31(1):8-20.

El-Askary, Farid Sabry; Botros, Sara Adel; Nassif, Mohamed Salah Abdelaziz; Özcan, Mutlu (2017). Flexural strength of nano-hybrid resin composite as a function of light attenuation distance and specimen dimension. Journal of Adhesion Science and Technology, 31(5):520-529.

El-Askary, Farid Sabry; Salah, Maha; Anwar, Mohammed Nasser; Özcan, Mutlu (2017). Immediate and delayed repair bond strength of a new ormocer resin restorative material as a function of mechanical and chemical surface conditioning methods. Journal of Adhesion Science and Technology, 31(3):310-326.

Peker, Sertac; Giray, Figen Eren; Durmus, Basak; Bekiroglu, Nural; Kargül, Betül; Özcan, Mutlu (2017). Microleakage in class V cavities prepared using conventional method versus Er:YAG laser restored with glass ionomer cement or resin composite. Journal of Adhesion Science and Technology, 31(5):509-519.

Etiemble, A; Besnard, N; Bonnin, A; Adrien, J; Douillard, T; Tran-Van, P; Gautier, L; Badot, J-C; Maire, E; Lestriez, B (2017). Multiscale morphological characterization of process induced heterogeneities in blended positive electrodes for lithium–ion batteries. Journal of Materials Science, 52(7):3576-3596.

Borer, D; Delbruck, T; Rösgen, T (2017). Three-dimensional particle tracking velocimetry using dynamic vision sensors. Experiments in Fluids:58:165.

2016

Al-Haj Husain, Nadin; Camilleri, Josette; Özcan, Mutlu (2016). Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis. Journal of the Mechanical Behavior of Biomedical Materials, 64:104-112.

Coray, Rafaela; Zeltner, Marco; Özcan, Mutlu (2016). Fracture strength of implant abutments after fatigue testing: A systematic review and a meta-analysis. Journal of the Mechanical Behavior of Biomedical Materials, 62:333-346.

Zingerman-Koladko, Irena; Khayat, Maayan; Harapin, Jan; Shoseyov, Oded; Gruenbaum, Yosef; Salman, Ahmad; Medalia, Ohad; Ben-Harush, Kfir (2016). The assembly of C. elegans lamins into macroscopic fibers. Journal of the Mechanical Behavior of Biomedical Materials, 63:35-43.

Anjum, Fraz; Lienemann, Philipp S; Metzger, Stéphanie; Biernaskie, Jeff; Kallos, Michael S; Ehrbar, Martin (2016). Enzyme responsive GAG-based natural-synthetic hybrid hydrogel for tunable growth factor delivery and stem cell differentiation. Biomaterials, 87:104-117.

Gresnigt, Marco M M; Özcan, Mutlu; van den Houten, Mieke L A; Schipper, Laura; Cune, Marco S (2016). Fracture strength, failure type and Weibull characteristics of lithium disilicate and multiphase resin composite endocrowns under axial and lateral forces. Dental Materials, 32(5):607-614.

Gresnigt, Marco M M; Cune, Marco S; de Roos, Joanne G; Özcan, Mutlu (2016). Effect of immediate and delayed dentin sealing on the fracture strength, failure type and Weilbull characteristics of lithiumdisilicate laminate veneers. Dental Materials, 32(4):e73-e81.

Schmidlin, Patrick R; Eichberger, Marlis; Stawarczyk, Bogna (2016). Glycine: A potential coupling agent to bond to helium plasma treated PEEK? Dental Materials, 32(2):305-310.

Ender, Andreas; Bienz, Stefan; Mörmann, Werner; Mehl, Albert; Attin, Thomas; Stawarczyk, Bogna (2016). Marginal adaptation, fracture load and macroscopic failure mode of adhesively luted PMMA-based CAD/CAM inlays. Dental Materials, 32(2):e22-e29.

Maire, Eric; Le Bourlot, Christophe; Adrien, Jérôme; Mortensen, Andreas; Mokso, Rajmund (2016). 20 Hz X-ray tomography during an in situ tensile test. International Journal of Fracture, 200(1-2):3-12.

Perrini, Michela; Barrett, Devin; Ochsenbein-Koelble, Nicole; Zimmermann, Roland; Messersmith, Phillip; Ehrbar, Martin (2016). A comparative investigation of mussel-mimetic sealants for fetal membrane repair. Journal of the Mechanical Behavior of Biomedical Materials, 58:57-64.

Dilber, Erhan; Aglarcı, Cahide; Akın, Mehmet; Özcan, Mutlu (2016). Adhesion of metal brackets to glassy matrix and hybrid CAD/CAM materials after different physico-chemical surface conditioning. Journal of Adhesion Science and Technology, 30(15):1700-1709.

Yuzbasioglu, Emir; Sayar-Torun, Gülşilay; Özcan, Mutlu (2016). Adhesion of orthodontic brackets to indirect laboratory-processed resin composite as a function of surface conditioning methods and artificial aging. Journal of Adhesion Science and Technology, 30(23):2565-2572.

Müller, Nicolas; Schmidlin, Patrick; Özcan, Mutlu (2016). Adhesive durability of bone cements containing gentamicin or gentamicin/clindamycin-based antibiotics on titanium used for oral implants. Journal of Adhesion Science and Technology, 30(19):2130-2145.

Özcan, Mutlu; Sadiku, Merita (2016). Analysis of structural, morphological alterations, wettability characteristics and adhesion to enamel after various surface conditioning methods. Journal of Adhesion Science and Technology, 30(22):2453-2465.

Stauffer, Flurin; Tybrandt, Klas (2016). Bright stretchable alternating current electroluminescent displays based on high permittivity composites. Advanced Materials, 28(33):7200-7203.

Özsoy, Alev; Kuşdemir, Mahmut; Öztürk-Bozkurt, Funda; Toz Akalın, Tuğba; Özcan, Mutlu (2016). Clinical performance of indirect composite onlays and overlays: 2-year follow up. Journal of Adhesion Science and Technology, 30(16):1808-1818.

Kenel, C; Grolimund, D; Fife, J L; Samson, V A; Van Petegem, S; Van Swygenhoven, H; Leinenbach, C (2016). Combined in situ synchrotron micro X-ray diffraction and high-speed imaging on rapidly heated and solidified Ti–48Al under additive manufacturing conditions. Scripta Materialia, 114:117-120.

Stawarczyk, Bogna; Frevert, Kathrin; Ender, Andreas; Roos, Malgorzata; Sener, Beatrice; Wimmer, Timea (2016). Comparison of four monolithic zirconia materials with conventional ones: Contrast ratio, grain size, four-point flexural strength and two-body wear. Journal of the Mechanical Behavior of Biomedical Materials, 59(6):128-138.

de Carvalho, Rodrigo Furtado; Özcan, Mutlu; Louzada, Frederico; Monteiro, Evelyn; Bottino, Marco Antonio; de Melo, Renata Marques; Valandro, Luiz Felipe (2016). Comparison of methanol/hydrochloric, ferric chloride acid versus tribochemical silica coating for adhesion of resin cement to zirconium dioxide. Journal of Adhesion Science and Technology, 30(24):2690-2698.

Özcan, Mutlu; Yetkiner, Enver (2016). Could readily silanized silica particles substitute silica coating and silanization in conditioning zirconium dioxide for resin adhesion? Journal of Adhesion Science and Technology, 30(2):186-193.

Nembrini, Erica; Acquaviva, Pier Antonio; Zubani, Andrea; Queiroz, José Renato Cavalcanti; Cerutti, Antonio; Özcan, Mutlu (2016). Degree of conversion and adhesion of methacrylate-based resin cements with phosphonic or phosphoric acid acrylate to glass fiber posts at different regions of intraradicular dentin. Journal of Adhesion Science and Technology, 30(3):328-337.

Kusdemir, Mahmut; Çetin, Ali Rıza; Özsoy, Alev; Toz, Tuğba; Öztürk-Bozkurt, Funda; Özcan, Mutlu (2016). Does 2% chlorhexidine digluconate cavity disinfectant or sodium fluoride/hydroxyethyl methacrylate affect adhesion of universal adhesive to dentin? Journal of Adhesion Science and Technology, 30(1):13-23.

Cengiz, Seda; Koçak, Sibel; Koçak, Murat; Velioğlu, Neslin; Sadettinoğlu, Koray; Özcan, Mutlu (2016). Effect of Er,Cr:YSGG laser surface conditioning on the adhesion of fiber- reinforced composite and zirconia intraradicular posts to the root dentin. Journal of Adhesion Science and Technology, 30(18):1957-1967.

Corazza, Pedro Henrique; de Carvalho, Rodrigo Furtado; de Assunção e Souza, Rodrigo Othávio; Bottino, Marco Antonio; Özcan, Mutlu (2016). Effect of aging type and aged unit on the repair strength of resin composite to feldspathic porcelain in testing microtensile bond strength. Journal of Adhesion Science and Technology, 30(4):434-442.

Al-Haj Husain, Nadin. Effect of polishing instruments and polishing regimens on surface topography and phase transformation of monolithic zirconia: An evaluation with XPS and XRD analysis. 2016, University of Zurich, Faculty of Medicine.

Moharam, Lamiaa Mohmoud; Botros, Sara Adel; El-Askary, Farid Sabry; Özcan, Mutlu (2016). Effect of polymerization protocol on the degree of conversion of photo- and dual-polymerized self-etch adhesives. Journal of Adhesion Science and Technology, 30(3):262-274.

Lima, Adriano Fonseca; de Vicente Leiteb, Thatiana; Palialol, Alan Muniz; Catelan, Anderson; Aguiar, Flávio Henrique Baggio; Marchi, Giselle Maria; Yuzbasioglu, Emir; Özcan, Mutlu (2016). Effect of surface conditioning methods, adhesive systems and resin composite on repair strength of dimethacrylate and silorane resin composites. Journal of Adhesion Science and Technology, 30(24):2736-2744.

Rippe, Marília Pivetta; Wandscher, Vinícius Felipe; Bergoli, César Dalmolin; Baldissara, Paolo; Özcan, Mutlu; Valandro, Luiz Felipe (2016). Effect of the frequency of mechanical pulses for fatigue aging testing on push-out bond strength between glass fiber posts and root dentin. Journal of Adhesion Science and Technology, 30(11):1243-1252.

Sukuroglu, Elcin; Aktas, Guliz; Askın, Kerem; Queiroz, José Renato Cavalcanti; Özcan, Mutlu (2016). Effect of timing for core preparation, luting cement type and root level on adhesion of fiber posts to intraradicular dentin. Journal of Adhesion Science and Technology, 30(6):633-641.

Pozzobon, João Luiz; Missau, Taiane; Druck, Carolina Ceolin; Özcan, Mutlu; Valandro, Luiz Felipe (2016). Effects of different particle deposition parameters on adhesion of resin cement to zirconium dioxide and phase transformation. Journal of Adhesion Science and Technology, 30(4):412-421.

Koitz, Ralph; Hutter, Jürg; Iannuzzi, Marcella (2016). Formation and properties of a terpyridine-based 2D MOF on the surface of water. 2D Materials, 3(2):25026.

Geraci, Gianluca; Congedo, Pietro Marco; Abgrall, Rémi; Iaccarino, Gianluca (2016). High-order statistics in global sensitivity analysis: Decomposition and model reduction. Computer Methods in Applied Mechanics and Engineering, 301:80-115.

Öztürk-Bozkurt, Funda; Toz-Akalin, Tugba; Gözetici, Burcu; Kusdemir, Mahmut; Özsoy, Alev; Gozukara-Bağ, Harika; Özcan, Mutlu (2016). Load-bearing capacity and failure types of premolars restored with sonic activated bulk-fill-, nano-hybrid and silorane-based resin restorative materials. Journal of Adhesion Science and Technology, 30(17):1880-1890.

Eyüboğlu, Tan Fırat; Türkün, Murat; Erdilek, Necdet; Özcan, Mutlu (2016). Long-term microleakage trends in access cavities conditioned with phosphoric acid and deproteinizing agent for root-canal-treated teeth: an investigation of fluid filtration and microscopy analysis. Journal of Adhesion Science and Technology, 30(14):1574-1584.

Sarıdağ, Serkan; Helvacıoğlu-Yiğit, Dilek; Özcan, Mutlu; Avcu, Egemen; Kızıltaş, Güllü (2016). Micro-computerized tomography analysis of cement voids and pull-out strength of glass fiber posts luted with self-adhesive and glass-ionomer cements in the root canal. Journal of Adhesion Science and Technology, 30(14):1585-1595.

Berglund, Ida S; Jacobs, Brittany Y; Allen, Kyle D; Kim, Stanley E; Pozzi, Antonio; Allen, Josephine B; Manuel, Michele V (2016). Peri-implant tissue response and biodegradation performance of a Mg–1.0Ca–0.5Sr alloy in rat tibia. Materials Science and Engineering: C, 62:79-85.

Martinez, Vincent; Behr, Pascal; Drechsler, Ute; Polesel-Maris, Jérôme; Potthoff, Eva; Vörös, Janos; Zambelli, Tomaso (2016). SU-8 hollow cantilevers for AFM cell adhesion studies. Journal of Micromechanics and Microengineering, 26(5):055006.

Ossola, Dario; Dörig, Pablo; Vörös, János; Zambelli, Tomaso; Vassalli, Massimo (2016). Serial weighting of micro-objects with resonant microchanneled cantilevers. Nanotechnology, 27(41):415502.

Hirt, Luca; Ihle, Stephan; Pan, Zhijian; Dorwling-Carter, Livie; Reiser, Alain; Wheeler, Jeffrey M; Spolenak, Ralph; Vörös, János; Zambelli, Tomaso (2016). Template-Free 3D Microprinting of Metals Using a Force-Controlled Nanopipette for Layer-by-Layer Electrodeposition. Advanced Materials, 28(12):2311-2315.

Wimmer, Timea; Huffmann, Anne Mildred Sophie; Eichberger, Marlis; Schmidlin, Patrick R; Stawarczyk, Bogna (2016). Two-body wear rate of PEEK, CAD/CAM resin composite and PMMA: Effect of specimen geometries, antagonist materials and test set-up configuration. Dental Materials, 32(6):e127-e136.

2015

Dreyer, Anne-Kathrin; Hoffmann, Dirk; Lachmann, Nico; Ackermann, Mania; Steinemann, Doris; Timm, Barbara; Siler, Ulrich; Reichenbach, Janine; Grez, Manuel; Moritz, Thomas; Schambach, Axel; Cathomen, Toni (2015). TALEN-mediated functional correction of X-linked chronic granulomatous disease in patient-derived induced pluripotent stem cells. Biomaterials, 69:191-200.

Meseck, Georg R; Fabbri, Emiliana; Schmidt, Thomas J; Seeger, Stefan (2015). Silicone nanofilament supported nickel oxide: a new concept for oxygen evolution catalysts in water electrolyzers. Advanced Materials Interfaces, 2(12):online.

Abgrall, Rémi; Congedo, Pietro Marco; Geraci, Gianluca; Iaccarino, Gianluca (2015). An adaptive multiresolution semi-intrusive scheme for UQ in compressible fluid problems. International Journal for Numerical Methods in Fluids, 78(10):595-637.

Kloukos, Dimitrios; Sifakakis, Iosif; Voutsa, Dimitra; Doulis, Ioannis; Eliades, George; Katsaros, Christos; Eliades, Theodore (2015). BPA qualtitative and quantitative assessment associated with orthodontic bonding in vivo. Dental Materials, 31(8):887-894.

Pereira, Gabriel Kalil Rocha; Lançanova, Mateus; Wandscher, Vinicius Felipe; Kaizer, Osvaldo Bazzan; Limberger, Inácio; Özcan, Mutlu; Valandro, Luiz Felipe (2015). Fiber-matrix integrity, micromorphology and flexural strength of glass fiber posts: Evaluation of the impact of rotary instruments. Journal of the Mechanical Behavior of Biomedical Materials, 48:192-199.

Baumgartner, Walter; Welti, Manfred; Hild, Nora; Hess, Samuel C; Stark, Wendelin J; Bürgisser, Gabriella Meier; Giovanoli, Pietro; Buschmann, Johanna (2015). Tissue mechanics of piled critical size biomimetic and biominerizable nanocomposites: Formation of bioreactor-induced stem cell gradients under perfusion and compression. Journal of the Mechanical Behavior of Biomedical Materials, 47:124-134.

Sailer, Irena; Makarov, Nikolay Alexandrovich; Thoma, Daniel Stefan; Zwahlen, Marcel; Pjetursson, Bjarni Elvar (2015). All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part I: Single crowns (SCs). Dental Materials, 31(6):603-623.

Pjetursson, Bjarni Elvar; Sailer, Irena; Makarov, Nikolay Alexandrovich; Zwahlen, Marcel; Thoma, Daniel Stefan (2015). All-ceramic or metal-ceramic tooth-supported fixed dental prostheses (FDPs)? A systematic review of the survival and complication rates. Part II: Multiple-unit FDPs. Dental Materials, 31(6):624-639.

Rosalia, Rodney A; Cruz, Luis J; van Duikeren, Suzanne; Tromp, Angelino T; Silva, Ana L; Jiskoot, Wim; de Gruijl, Tanja; Löwik, Clemens; Oostendorp, Jaap; van der Burg, Sjoerd H; Ossendorp, Ferry (2015). CD40-targeted dendritic cell delivery of PLGA-nanoparticle vaccines induce potent anti-tumor responses. Biomaterials, 40:88-97.

Bütikofer, Lukas; Stawarczyk, Bogna; Roos, Malgorzata (2015). Two regression methods for estimation of a two-parameter Weibull distribution for reliability of dental materials. Dental Materials, 31(2):e33-e50.

Dobeš, Jiři; Ricchiuto, Mario; Abgrall, Rémi; Deconinck, Herman (2015). On hybrid residual distribution–Galerkin discretizations for steady and time dependent viscous laminar flows. Computer Methods in Applied Mechanics and Engineering, 283:1336-1356.

Gökçe, Bülent; Çötert, Hamit Serdar; Özcan, Mutlu (2015). A study of compressive strength between zirconia framework and veneering ceramic as a function of thermal expansion coefficient using Shell–Nielsen test method. Journal of Adhesion Science and Technology, 29(18):1924-1936.

Li, Guanying; Chen, Yu; Wang, Jinquan; Wu, Jingheng; Gasser, Gilles; Ji, Liangnian; Chao, Hui (2015). Direct Imaging of Biological Sulfur Dioxide Derivatives in Vivo Using a Two-Photon Phosphorescent Probe. Biomaterials, 63:128-136.

Hailesilassie, Biruk W; Schuetz, Philipp; Jerjen, Iwan; Hugener, Martin; Partl, Manfred N (2015). Dynamic X-ray radiography for the determination of foamed bitumen bubble area distribution. Journal of Materials Science, 50(1):79-92.

Schloth, P; Menzel, A; Fife, J L; Wagner, J N; Van Swygenhoven, H; Drezet, J-M (2015). Early cluster formation during rapid cooling of an Al–Cu–Mg alloy: In situ small-angle X-ray scattering. Scripta Materialia, 108:56-59.

Aykut-Yetkiner, Arzu; Candan, Umit; Ersin, Nazan; Eronat, Cemal; Belli, Sema; Özcan, Mutlu (2015). Effect of 2% chlorhexidine gluconate cavity disinfectant on microtensile bond strength of tooth-coloured restorative materials to sound and caries-affected dentin. Journal of Adhesion Science and Technology, 29(12):1169-1177.

Özcan, Mutlu; Lamperti, Sofia (2015). Effect of mechanical and air-particle cleansing protocols of provisional cement on immediate dentin sealing layer and subsequent adhesion of resin composite cement. Journal of Adhesion Science and Technology, 29(24):2731-2743.

Villevieille, Claire; Ebner, Martin; Gómez-Cámer, Juan Luis; Marone, Federica; Novák, Petr; Wood, Vanessa (2015). Influence of conversion material morphology on electrochemistry studied with operando X-ray tomography and diffraction. Advanced Materials, 27(10):1676-1681.

Dielacher, Bernd; Tiefenauer, Raphael F; Junesch, Juliane; Vörös, János (2015). Iodide sensing via electrochemical etching of ultrathin gold films. Nanotechnology, 26(2):025202.

Chu, Zonglin; Seeger, Stefan (2015). Multifunctional hybrid porous micro-/nanocomposite materials. Advanced Materials, 27(47):7775-7781.

Grüter, Robert R; Dielacher, Bernd; Hirt, Luca; Vörös, János; Zambelli, Tomaso (2015). Patterning gold nanoparticles in liquid environment with high ionic strength for local fabrication of up to 100μm long metallic interconnections. Nanotechnology, 26(17):175301.

Ali, Mazhar N; von Rohr, Fabian; Campana, C; Schilling, Andreas; Cava, R J (2015). The crystal structure, electronic, and magnetic properties of NaPd$_3$Ge$_2$. Materials Research Bulletin, 70:673-677.

Zhang, Pingyu; Wang, Jinquan; Huang, Huaiyi; Yu, Bole; Qiu, Kangqiang; Huang, Juanjuan; Wang, Shutao; Jiang, Lei; Gasser, Gilles; Ji, Liangnian; Chao, Hui (2015). Unexpected High Photothemal Conversion Efficiency of Gold Nanospheres upon Grafting with Two-Photon Luminescent Ruthenium(II) Complexes: A Way Towards Cancer Therapy? Biomaterials, 63:102-114.

Theiss, Felix; Mirsaidi, Ali; Mhanna, Rami; Kümmerle, Jan M; Glanz, Stephan; Bahrenberg, Gregor; Tiaden, André N; Richards, Peter J (2015). Use of biomimetic microtissue spheroids and specific growth factor supplementation to improve tenocyte differentiation and adaptation to a collagen-based scaffold in vitro. Biomaterials, 69:99-109.

2014

Abgrall, Rémi; Dobrzynski, Cécile; Froehly, A (2014). A method for computing curved meshes via the linear elasticity analogy. International Journal for Numerical Methods in Fluids, 76(4):246-266.

Robotti, Francesco; Franco, Davide; Bänninger, Livia; Wyler, Jair; Starck, Christoph T; Falk, Volkmar; Poulikakos, Dimos; Ferrari, Aldo (2014). The influence of surface micro-structure on endothelialization under supraphysiological wall shear stress. Biomaterials, 35(30):8479-8486.

Özcan, Mutlu; De Araujo Michida, Silvia M; Sipahi, Cumhur; Souza, Rodrigo O A; Lombardo, Geraldo; Takahashi, Fernando E; Nascente, P (2014). Comparison of Physicochemical Surface Conditioning Methods for Adhesion of bis-GMA Resin Cement to Particulate Filler Composite and Surface Characterization. Journal of Adhesion, 90(7):569-584.

Özcan, M; Koc-Dundar, B (2014). Composite–composite adhesion in dentistry: a systematic review and meta-analysis. Journal of Adhesion Science and Technology, 28(21):2209-2229.

Gulsoy, Emine Begum; Shahani, Ashwin J; Gibbs, John W; Fife, Julie L; Voorhees, Peter W (2014). Four-Dimensional Morphological Evolution of an Aluminum Silicon Alloy Using Propagation-Based Phase Contrast X-ray Tomographic Microscopy. Materials Transactions, 55(1):161-164.

Tauböck, Tobias T; Zehnder, Matthias; Schweizer, Thomas; Stark, Wendelin J; Attin, Thomas; Mohn, Dirk (2014). Functionalizing a dentin bonding resin to become bioactive. Dental Materials, 30(8):868-875.

Attin, Thomas; Wegehaupt, Florian J (2014). Impact of erosive conditions on tooth-colored restorative materials. Dental Materials, 30(1):43-49.

Stawarczyk, Bogna; Stich, Nicola; Eichberger, Marlis; Edelhoff, Daniel; Roos, Malgorzata; Gernet, Wolfgang; Keul, Christine (2014). Long-term tensile bond strength of differently cemented nanocomposite CAD/CAM crowns on dentin abutment. Dental Materials, 30(3):334-342.

Patera, A; Jefimovs, K; Rafsanjani, A; Voisard, F; Mokso, R; Derome, D; Carmeliet, J (2014). Micro-Scale Restraint Methodology for Humidity Induced Swelling Investigated by Phase Contrast X-Ray Tomography. Experimental Mechanics, 54(7):1215-1226.

Wiedemair, W; Tukovic, Z; Jasak, H; Poulikakos, D; Kurtcuoglu, V (2014). Modeling the interaction of microbubbles: Effects of proximity, confinement, and excitation amplitude. Physics of Fluids, 26(6):062106.

Reutlinger, Christoph; Bürki, Alexander; Brandejsky, Vaclav; Ebert, Lars C; Büchler, Philippe (2014). Specimen specific parameter identification of ovine lumbar intervertebral discs: On the influence of fibre–matrix and fibre–fibre shear interactions. Journal of the Mechanical Behavior of Biomedical Materials, 30:279-289.

Mirsaidi, Ali; Genelin, Konstantin; Vetsch, Jolanda R; Stanger, Scott; Theiss, Felix; Lindtner, Richard A; von Rechenberg, Brigitte; Blauth, Michael; Müller, Ralph; Kuhn, Gisela A; Hofmann Boss, Sandra; Ebner, Hannes L; Richards, Peter (2014). Therapeutic potential of adipose-derived stromal cells in age-related osteoporosis. Biomaterials, 35(26):7326-7335.

Klar, Agnieszka S; Güven, Sinan; Biedermann, Thomas; Luginbühl, Joachim; Böttcher-Haberzeth, Sophie; Meuli-Simmen, Claudia; Meuli, Martin; Martin, Ivan; Scherberich, Arnaud; Reichmann, Ernst (2014). Tissue-engineered dermo-epidermal skin grafts prevascularized with adipose-derived cells. Biomaterials, 35(19):5065-5078.

2013

Mosiewicz, Katarzyna A; Kolb, Laura; van der Vlies, André J; Martino, Mikaël M; Lienemann, Philipp S; Hubbell, Jeffrey A; Ehrbar, Martin; Lutolf, Matthias P (2013). In situ cell manipulation through enzymatic hydrogel photopatterning. Nature Materials, 12(11):1072-1078.

Weber, B; Dijkman, P E; Scherman, J; Sanders, B; Emmert, M Y; Grünenfelder, J; Verbeek, R; Bracher, M; Black, M; Franz, T; Kortsmit, J; Modregger, P; Peter, S; Stampanoni, M; Robert, J; Kehl, D; van Doeselaar, M; Schweiger, M; Brokopp, C E; Wälchli, T; Falk, V; Zilla, P; Driessen-Mol, A; Baaijens, F P; Hoerstrup, S P (2013). Off-the-shelf human decellularized tissue-engineered heart valves in a non-human primate model. Biomaterials, 34(30):7269-7280.

Li, Xiang; Snedeker, Jess G (2013). Wired silk architectures provide a biomimetic ACL tissue engineering scaffold. Journal of the Mechanical Behavior of Biomedical Materials, 22:30-40.

Wang, Zhijian J; Fidkowski, Krzysztof; Abgrall, Rémi; Bassi, Francesco; Caraeni, Doru; Cary, Andrew; Deconinck, Herman; Hartmann, Ralf; Hillewaert, Koen; Huynh, Hung T; Kroll, Norbert; May, Georg; Persson, Per-Olof; van Leer, Bram; Visbal, Miguel R (2013). High-order CFD methods: Current status and perspective. International Journal for Numerical Methods in Fluids, 72(8):811-845.

Martyniuk, Karolina; Sørensen, Bent F; Modregger, Peter; Lauridsen, Erik M (2013). 3D in situ observations of glass fibre/matrix interfacial debonding. Composites Part A: Applied Science and Manufacturing, 55:63-73.

Horst, Maya; Madduri, Srinivas; Milleret, Vincent; Sulser, Tullio; Gobet, Rita; Eberli, Daniel (2013). A bilayered hybrid microfibrous PLGA-Acellular matrix scaffold for hollow organ tissue engineering. Biomaterials, 34(5):1537-1545.

Badir, Sabrina; Bajka, Michael; Mazza, Edoardo (2013). A novel procedure for the mechanical characterization of the uterine cervix during pregnancy. Journal of the Mechanical Behavior of Biomedical Materials, 27:143-153.

Franco, Davide; Milde, Florian; Klingauf, Mirko; Orsenigo, Fabrizio; Dejana, Elisabetta; Poulakikos, Dimos; Cecchini, Marco; Koumoutsakos, Petros; Ferrari, Aldo; Kurtcuoglu, Vartan (2013). Accelerated endothelial wound healing on microstructured substrates under flow. Biomaterials, 34(5):1488-1497.

Abgrall, Rémi; Krust, Arnaud (2013). An adaptive enrichment algorithm for advection-dominated problems. International Journal for Numerical Methods in Fluids, 72(3):359-374.

Kloukos, Dimitrios; Taoufik, Era; Eliades, Theodore; Katsaros, Christos; Eliades, George (2013). Cytotoxic effects of polycarbonate-based orthodontic brackets by activation of mitochondrial apoptotic mechanisms. Dental Materials, 29(3):e35-44.

Friedli, Jonathan; Fife, J L; Di Napoli, P; Rappaz, M (2013). Dendritic Growth Morphologies in Al-Zn Alloys—Part I: X-ray Tomographic Microscopy. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 44(12):5522-5531.

Özcan, Mutlu; Melo, Renata M; Souza, Rodrigo O A; Machado, João P B; Felipe Valandro, Luiz; Botttino, Marco A (2013). Effect of air-particle abrasion protocols on the biaxial flexural strength, surface characteristics and phase transformation of zirconia after cyclic loading. Journal of the Mechanical Behavior of Biomedical Materials, 20:19-28.

Leite, Fabiola Pessoa; Özcan, Mutlu; Valandro, Luiz Felipe; Cunha Moreira, Carlos Heitor; Amaral, Regina; Bottino, Marco Antonio; Kimpara, Estevao Tomomitsu (2013). Effect of the Etching Duration and Ultrasonic Cleaning on Microtensile Bond Strength Between Feldspathic Ceramic and Resin Cement. Journal of Adhesion, 89(3):159-173.

Papakonstantinou, Alexia E; Eliades, Theodore; Cellesi, Francesco; Watts, David C; Silikas, Nick (2013). Evaluation of UDMA's potential as a substitute for Bis-GMA in orthodontic adhesives. Dental Materials, 29(8):898-905.

Burnett, Luke R; Rahmany, Maria B; Richter, Jillian R; Aboushwareb, Tamer A; Eberli, Daniel; Ward, Catherine L; Orlando, Giuseppe; Hantgan, Roy R; Van Dyke, Mark E (2013). Hemostatic properties and the role of cell receptor recognition in human hair keratin protein hydrogels. Biomaterials, 34(11):2632-2640.

Emmert, Maximilian Y; Wolint, Petra; Wickboldt, Nadine; Gemayel, Gino; Weber, Benedikt; Brokopp, Chad E; Boni, Alessandro; Falk, Volkmar; Bosman, Alexis; Jaconi, Marisa E; Hoerstrup, Simon P (2013). Human stem cell-based three-dimensional microtissues for advanced cardiac cell therapies. Biomaterials, 34(27):6339-6354.

Liebermann, Anja; Keul, Christine; Bähr, Nora; Edelhoff, Daniel; Eichberger, Marlis; Roos, Malgorzata; Stawarczyk, Bogna (2013). Impact of plasma treatment of PMMA-based CAD/CAM blanks on surface properties as well as on adhesion to self-adhesive resin composite cements. Dental Materials, 29(9):935-944.

Indiveri, G; Linares-Barranco, B; Legenstein, R; Deligeorgis, G; Prodromakis, T (2013). Integration of nanoscale memristor synapses in neuromorphic computing architectures. Journal of Biomedical Nanotechnology, 24(38):384010.

Abgrall, Rémi; Baurin, G; Krust, Arnaud; de Santis, Dante; Ricchiuto, Mario (2013). Numerical approximation of parabolic problems by residual distribution schemes. International Journal for Numerical Methods in Fluids, 71(9):1191-1206.

Eliades, Anna; Birpou, Eleftheria; Eliades, Theodore; Eliades, George (2013). Self-adhesive restoratives as pit and fissure sealants: a comparative laboratory study. Dental Materials, 29(7):752-762.

Grundmann, Henrik; Schilling, Andreas; Marjerrison, Casey A; Dabkowska, Hanna A; Gaulin, Bruce D (2013). Structure and magnetic interactions in the solid solution Ba3−xSrxCr2O8. Materials Research Bulletin, 48(9):3108-3111.

Thiersch, Markus; Rimann, Markus; Panagiotopoulou, Vasiliki; Öztürk, Ece; Biedermann, Thomas; Textor, Marcus; Lühmann, Tessa C; Hall, Heike (2013). The angiogenic response to PLL-g-PEG-mediated HIF-1α plasmid DNA delivery in healthy and diabetic rats. Biomaterials, 34(16):4173-4182.

Emmert, Maximilian Y; Wolint, Petra; Winklhofer, Sebastian; Stolzmann, Paul; Cesarovic, Nikola; Fleischmann, Thea; Nguyen, Thi D L; Frauenfelder, Thomas; Böni, Roland; Scherman, Jacques; Bettex, Dominique; Grünenfelder, Jürg; Schwartlander, Ruth; Vogel, Viola; Gyöngyösi, Mariann; Alkadhi, Hatem; Falk, Volkmar; Hoerstrup, Simon P (2013). Transcatheter based electromechanical mapping guided intramyocardial transplantation and in vivo tracking of human stem cell based three dimensional microtissues in the porcine heart. Biomaterials, 34(10):2428-2441.

Landolt, Andrin; Obrist, Dominik; Wyss, Matthias; Barrett, Matthew; Langer, Dominik; Jolivet, Renaud; Soltysinski, Tomasz; Roesgen, Thomas; Weber, Bruno (2013). Two-photon microscopy with double-circle trajectories for in vivo cerebral blood flow measurements. Experiments in Fluids, 54(5):1523-1530.

Balz, R; Mokso, R; Narayanan, C; Weiss, D A; Heiniger, K C (2013). Ultra-fast X-ray particle velocimetry measurements within an abrasive water jet. Experiments in Fluids, 54(3):1476.

Mörmann, Werner H; Stawarczyk, Bogna; Ender, Andreas; Sener, Beatrice; Attin, Thomas (2013). Wear characteristics of current aesthetic dental restorative CAD/CAM materials: Two-body wear, gloss retention, roughness and martens hardness. Journal of the Mechanical Behavior of Biomedical Materials, 20:113-125.

Michel, Frank I; Schmitt, Kai-Uwe; Greenwald, Richard M; Russell, Kelly; Simpson, Frank I; Schulz, David; Langran, Mike (2013). White Paper: functionality and efficacy of wrist protectors in snowboarding—towards a harmonized international standard. Sports Engineering, 16(4):197-210.

2012

Özcan, Mutlu; Dündar, Mine; Erhan Çömlekoğlu, M (2012). Adhesion concepts in dentistry: tooth and material aspects. Journal of Adhesion Science and Technology, 26(24):2661-2681.

Hitz, Thomas; Stawarczyk, Bogna; Fischer, Jens; Hämmerle, Christoph H F; Sailer, Irena (2012). Are self-adhesive resin cements a valid alternative to conventional resin cements? A laboratory study of the long-term bond strength. Dental Materials, 28(11):1183-1190.

Heintze, S D; Faouzi, M; Rousson, V; Özcan, Mutlu (2012). Correlation of wear in vivo and six laboratory wear methods. Dental Materials, 28(9):961-973.

Dijkman, Petra E; Driessen-Mol, Anita; Frese, Laura; Hoerstrup, Simon P; Baaijens, Frank P T (2012). Decellularized homologous tissue-engineered heart valves as off-the-shelf alternatives to xeno- and homografts. Biomaterials, 33(18):4545-4554.

Sipahi, Cumhur; Özcan, Mutlu; Piskin, Bülent (2012). Effect of physicochemical surface treatments on the bond strength and adhesion of porcelain denture teeth to heat-polymerized acrylic resin denture base material. The Journal of Adhesion, 88(2):200-212.

Roos, Malgorzata; Stawarczyk, Bogna (2012). Evaluation of bond strength of resin cements using different general-purpose statistical software packages for two-parameter Weibull statistics. Dental Materials, 28(7):e76-e88.

Stawarczyk, Bogna; Özcan, Mutlu; Trottmann, Albert; Hämmerle, Christohp H F; Roos, Malgorzata (2012). Evaluation of flexural strength of hipped and presintered zirconia using different estimation methods of Weibull statistics. Journal of the Mechanical Behavior of Biomedical Materials, 10:227-234.

Kelm, Jens M; Emmert, Maximilian Y; Zürcher, Armin; Schmidt, Dörthe; Begus Nahrmann, Yvonne; Rudolph, Karl L; Weber, Benedikt; Brokopp, Chad E; Frauenfelder, Thomas; Leschka, Sebastian; Odermatt, Bernhard; Jenni, Rolf; Falk, Volkmar; Zünd, Gregor; Hoerstrup, Simon P (2012). Functionality, growth and accelerated aging of tissue engineered living autologous vascular grafts. Biomaterials, 33(33):8277-8285.

Ferlat, Guillaume; Seitsonen, Ari Paavo; Lazzeri, Michele; Mauri, Francesco (2012). Hidden polymorphs drive vitrification in B2O3. Nature Materials, 11(11):925-929.

Zahn, Raphael; Thomasson, Elsa; Guillaume-Gentil, Orane; Vörös, János; Zambelli, Tomaso (2012). Ion-induced cell sheet detachment from standard cell culture surfaces coated with polyelectrolytes. Biomaterials, 33(12):3421-3427.

Özcan, Mutlu; Koekoek, Winand; Pekkan, Gurel (2012). Load-bearing capacity of indirect inlay-retained fixed dental prostheses made of particulate filler composite alone or reinforced with E-glass fibers impregnated with various monomers. Journal of the Mechanical Behavior of Biomedical Materials, 12:160-167.

Weber, Benedikt; Emmert, Maximilian Y; Behr, Luc; Schoenauer, Roman; Brokopp, Chad; Drögemüller, Cord; Modregger, Peter; Stampanoni, Marco; Vats, Divya; Rudin, Markus; Bürzle, Wilfried; Farine, Marc; Mazza, Edoardo; Frauenfelder, Thomas; Zannettino, Andrew C; Zünd, Gregor; Kretschmar, Oliver; Falk, Volkmar; Hoerstrup, Simon P (2012). Prenatally engineered autologous amniotic fluid stem cell-based heart valves in the fetal circulation. Biomaterials, 33(16):4031-4043.

Wiegand, A; Stawarczyk, B; Buchalla, W; Tauböck, T T; Özcan, M; Attin, T (2012). Repair of silorane composite - using the same substrate or a methacrylate-based composite? Dental Materials, 28(3):e19-e25.

Queiroz, José Renato Cavalcanti; Benetti, Paula; Özcan, Mutlu; de Oliveira, Luiz Fernando Cappa; Della Bona, Alvaro; Takahashi, Fernando Eidi; Bottino, Marco Antonio (2012). Surface characterization of feldspathic ceramic using ATR FT-IR and ellipsometry after various silanization protocols. Dental Materials, 28(2):189-196.

Stawarczyk, Bogna; Özcan, Mutlu; Hämmerle, Christoph H F; Roos, Malgorzata (2012). The fracture load and failure types of veneered anterior zirconia crowns: An analysis of normal and Weibull distribution of complete and censored data. Dental Materials, 28(5):478-487.

Stepuk, Alexander; Mohn, Dirk; Grass, Robert N; Zehnder, Matthias; Krämer, Karl W; Pellé, Fabienne; Ferrier, Alban; Stark, Wendelin J (2012). Use of NIR light and upconversion phosphors in light-curable polymers. Dental materials : official publication of the Academy of Dental Materials, 28(3):304-311.

2011

Drazen, D; Lichtsteiner, P; Hafliger, P; Delbruck, T; Jensen, A (2011). Toward real-time particle tracking using an event-based dynamic vision sensor. Experiments in Fluids, 51(5):1465-1469.

Watkins, M; Pan, D; Wang, E G; Michaelides, A; VandeVondele, J; Slater, B (2011). Large variation of vacancy formation energies in the surface of crystalline ice. Nature Materials, 10(10):794-798.

Peterseim, Daniel; Sauter, Stefan A (2011). Finite element methods for the Stokes problem on complicated domains. Computer Methods in Applied Mechanics and Engineering, 200(33-36):2611-2623.

Braess, D; Sauter, S; Schwab, C (2011). On the justification of plate models. Journal of Elasticity, 103(1):53-71.

MacKenzie, R; Fraschina, C; Sannomiya, T; Vörös, J (2011). Controlled in situ nanoscale enhancement of gold nanowire arrays with plasmonics. Nanotechnology, 22(5):055203.

MacKenzie, R; Fraschina, C; Sannomiya, T; Vörös, J (2011). Controlledin situnanoscale enhancement of gold nanowire arrays with plasmonics. Nanotechnology, 22(5):055203.

Weber, B; Schoenauer, R; Papadopulos, F; Modregger, P; Peter, S; Stampanoni, M; Mauri, A; Mazza, E; Gorelik, J; Agarkova, I; Frese, L; Breymann, C; Kretschmar, O; Hoerstrup, S P (2011). Engineering of living autologous human umbilical cord cell-based septal occluder membranes using composite PGA-P4HB matrices. Biomaterials, 32(36):9630-9641.

Stawarczyk, Bogna; Özcan, Mutlu; Roos, Malgorzata; Trottmann, Alabert; Sailer, Irena; Hämmerle, Christoph H F (2011). Load-bearing capacity and failure types of anterior zirconia crowns veneered with overpressing and layering techniques. Dental Materials, 27(10):1045-1053.

Guillaume-Gentil, O; Semenov, O V; Zisch, A H; Zimmermann, R; Vörös, J; Ehrbar, M (2011). pH-controlled recovery of placenta-derived mesenchymal stem cell sheets. Biomaterials, 32(19):4376-4384.

2010

Schmidlin, P R; Stawarczyk, B; Wieland, M; Attin, T; Hämmerle, C H F; Fischer, J (2010). Effect of different surface pre-treatments and luting materials on shear bond strength to PEEK. Dental Materials, 26(6):553-559.

Sharma, R I; Snedeker, J G (2010). Biochemical and biomechanical gradients for directed bone marrow stromal cell differentiation toward tendon and bone. Biomaterials, 31(30):7695-7704.

Kurtulmus, H; Kumbuloglu, O; Özcan, M; Ozdemir, G; Vural, C (2010). Candida albicans adherence on silicone elastomers: effect of polymerisation duration and exposure to simulated saliva and nasal secretion. Dental Materials, 26(1):76-82.

Engel, A (2010). Comment on 'Superconducting transition in Nb nanowires fabricated using a focused-ion beam'. Nanotechnology, 21(16):168001.

Rappaz, M; Kohler, F; Valloton, J; Phillion, A B; Stampanoni, M (2010). Connectivity of phases and growth mechanisms in peritectic alloys solidified at low speed: an X-ray tomography study of Cu-Sn. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 41(3):563-567.

Gabi, M; Bullen, M E; Agarkova, I; Schmidt, D; Schoenauer, R; Brokopp, C E; Emmert, M Y; Larmagnac, A; Sannomiya, T; Weber, B; Wilhelm, M J; Vörös, J; Hoerstrup, S P (2010). Effects of small pulsed nanocurrents on cell viability in vitro and in vivo: implications for biomedical electrodes. Biomaterials, 31(33):8666-8673.

Guillame-Gentil, O; Semenov, O; Roca, A S; Groth, T; Zahn, R; Vörös, J; Zenobi-Wong, M (2010). Engineering the extracellular environment: Strategies for building 2D and 3D cellular structures. Advanced Materials, 22(48):5443-5462.

Greber, T (2010). Graphene and Hexagonal Boron Nitride Layers: Nanostructures with 3 bond hierarchy levels. e-Journal of Surface Science and Nanotechnology, 8:62-64.

Bartolf, H; Inderbitzin, K; Gómez, L B; Engel, A; Schilling, A (2010). Nanoscale fabrication by intrinsic suppression of proximity-electron exposures and general considerations for easy and effective top–down fabrication. Journal of Micromechanics and Microengineering, 20(12):125015.

Bott, K; Upton, Z; Schrobback, K; Ehrbar, M; Hubbell, J A; Lutolf, M P; Rizzi, S C (2010). The effect of matrix characteristics on fibroblast proliferation in 3D gels. Biomaterials, 31(32):8454-8464.

Weder, G; Guillaume-Gentil, O; Matthey, N; Montagne, F; Heinzelmann, H; Vörös, J; Liley, M (2010). The quantification of single cell adhesion on functionalized surfaces for cell sheet engineering. Biomaterials, 31(25):6436-6443.

2009

Özcan, M; Valandro, L F; Amaral, R; Leite, F; Bottino, M A (2009). Bond strength durability of a resin composite on a reinforced ceramic using various repair systems. Dental Materials, 25(12):1477-1483.

Fischer, J; Ebinger, A; Hägi, T; Stawarczyk, B; Wenger, A; Keller, E (2009). Mold filling and dimensional accuracy of titanium castings in a spinel-based investment. Dental Materials, 25(11):1376-1382.

Özcan, M; Kumbuloglu, O (2009). Effect of composition, viscosity and thickness of the opaquer on the adhesion of resin composite to titanium. Dental Materials, 25(10):1248-1255.

Garcia-Fuentes, M; Meinel, A; Hilbe, M; Meinel, L; Merkle, H P (2009). Silk fibroin/hyaluronan scaffolds for human mesenchymal stem cell culture in tissue engineering. Biomaterials, 30(28):5068-5076.

Ritter, H; Nieminen, M; Karppinen, M; Brühwiler, D (2009). A comparative study of the functionalization of mesoporous silica MCM-41 by deposition of 3-aminopropyltrimethoxysilane from toluene and from the vapor phase. Microporous and Mesoporous Materials, 121(1-3):79-83.

Heintze, S D; Blunck, U; Göhring, T N; Rousson, V (2009). Marginal adaptation in vitro and clinical outcome of Class V restorations. Dental Materials, 25(5):605-620.

Fischer, J; Stawarczyk, B; Trottmann, A; Hämmerle, C H F (2009). Impact of thermal misfit on shear strength of veneering ceramic/zirconia composites. Dental Materials, 25(4):419-423.

Stern, M M; Myers, R L; Hammam, N; Stern, K A; Eberli, D; Kritchevsky, S B; Soker, S; Van Dyke, M (2009). The influence of extracellular matrix derived from skeletal muscle tissue on the proliferation and differentiation of myogenic progenitor cells ex vivo. Biomaterials, 30(12):2393-2399.

Arrighi, I; Mark, S; Alvisi, M; von Rechenberg, B; Hubbell, J A; Schense, J C (2009). Bone healing induced by local delivery of an engineered parathyroid hormone prodrug. Biomaterials, 30(9):1763-1771.

Fischer, J; Stawarczyk, B; Trottmann, A; Hämmerle, C H F (2009). Impact of thermal properties of veneering ceramics on the fracture load of layered Ce-TZP/A nanocomposite frameworks. Dental Materials, 25(3):326-330.

Vásquez, V Z C; Özcan, M; Kimpara, E T (2009). Evaluation of interface characterization and adhesion of glass ceramics to commercially pure titanium and gold alloy after thermal- and mechanical-loading. Dental Materials, 25(2):221-231.

Attin, T; Schmidlin, P R; Wegehaupt, F; Wiegand, A (2009). Influence of study design on the impact of bleaching agents on dental enamel microhardness: a review. Dental Materials, 25(2):143-157.

2008

Ehrbar, M; Schoenmakers, R; Christen, E H; Fussenegger, M; Weber, W (2008). Drug-sensing hydrogels for the inducible release of biopharmaceuticals. Nature Materials, 7(10):800-804.

Davies, N; Dobner, S; Bezuidenhout, D; Schmidt, C; Beck, M; Zisch, A H; Zilla, P (2008). The dosage dependence of VEGF stimulation on scaffold neovascularisation. Biomaterials, 29(26):3531-3538.

Holderegger, C; Sailer, I; Schuhmacher, C; Schläpfer, R; Hämmerle, C; Fischer, J (2008). Shear bond strength of resin cements to human dentin. Dental Materials, 24(7):944-950.

Ehrbar, M; Zeisberger, S M; Raeber, G P; Hubbell, J A; Schnell, C; Zisch, A H (2008). The role of actively released fibrin-conjugated VEGF for VEGF receptor 2 gene activation and the enhancement of angiogenesis. Biomaterials, 29(11):1720-1729.

Blättler, T M; Binkert, A; Zimmermann, M; Textor, M; Vörös, J; Reimhult, E (2008). From particle self-assembly to functionalized sub-micron protein patterns. Nanotechnology, 19(7):075301-075311.

Keller, H; Bussmann-Holder, A; Müller, K A (2008). Jahn–Teller physics and high-Tc superconductivity. Materials Today, 11(9):38-46.

Guillaume-Gentil, O; Akiyama, Y; Schuler, M; Tang, C; Textor, M; Yamato, M; Okano, T; Vörös, J (2008). Polyelectrolyte coatings with a potential for electronic control and cell sheet engineering. Advanced Materials, 20(3):560-565.

Zimmermann, J; Artus, G R J; Seeger, S (2008). Superhydrophobic silicone nanofilament coatings. Journal of Adhesion Science and Technology, 22(3-4):251-263.

2007

Ehrbar, M; Rizzi, S C; Hlushchuk, R; Djonov, V; Zisch, A H; Hubbell, J A; Weber, F E; Lutolf, M P (2007). Enzymatic formation of modular cell-instructive fibrin analogs for tissue engineering. Biomaterials, 28(26):3856-6386.

Sim, J H; Puria, S; Steele, C R (2007). Calculation of intertial properties of the malleus-incus complex from micro CT-imaging. Journal of Mechanics of Materials and Structures, 2(8):1515-24.

Städler, Brigitte; Solak, Harun H; Frerker, Susanne; Bonroy, Kristien; Frederix, Filip; Vörös, Janos; Grandin, H Michelle (2007). Nanopatterning of gold colloids for label-free biosensing. Nanotechnology, 18(15):155306.

Shipilova, O; Haario, H; Smolianski, A (2007). Particle transport method for convection problems with reaction and diffusion. International Journal for Numerical Methods in Fluids, 54(10):1215-1238.

Kunzler, Tobias P; Huwiler, Christoph; Drobek, Tanja; Vörös, Janos; Spencer, Nicholas D (2007). Systematic study of osteoblast response to nanotopography by means of nanoparticle-density gradients. Biomaterials, 28(33):5000-5006.

2006

Heintze, S D; Cavalleri, A; Forjanic, M; Zellweger, G; Rousson, V (2006). A comparison of three different methods for the quantification of the in vitro wear of dental materials. Dental Materials, 22(11):1051-1062.

Heintze, S D; Forjanic, M; Rousson, V (2006). Surface roughness and gloss of dental materials as a function of force and polishing time in vitro. Dental Materials, 22(2):146-165.

2005

Theiss, Felix; Apelt, Detlef; Brand, Bastian; Kutter, Annette P N; Zlinszky, Katalin; Bohner, Marc; Matter, Sandro; Frei, Christian; Auer, Jörg A; von Rechenberg, Brigitte (2005). Biocompatibility and resorption of a brushite calcium phosphate cement. Biomaterials, 26(21):4383-4394.

Lüthy, H; Filser, F; Loeffel, Ol; Schumacher, M; Gauckler, L J; Hämmerle, C H F (2005). Strength and reliability of four-unit all-ceramic posterior bridges. Dental Materials, 21(10):930-937.

Göhring, T N; Gallo, L; Lüthy, H (2005). Effect of water storage, thermocycling, the incorporation and site of placement of glass-fibers on the flexural strength of veneering composite. Dental Materials, 21(8):761-772.

Reclaru, L; Lüthy, H; Eschler, P Y; Blatter, A; Susz, C (2005). Corrosion behaviour of cobalt-chromium dental alloys doped with precious metals. Biomaterials, 26(21):4358-4365.

Schmidlin, Patrick R; Zehnder, Matthias; Zimmermann, May A; Zimmermann, Jörg; Roos, Malgorzata; Roulet, Jean-François (2005). Sealing smooth enamel surfaces with a newly devised adhesive patch: a radiochemical in vitro analysis. Dental Materials, 21(6):545-550.

Mol, A; van Lieshout, M I; Dam-de Veen, C G; Neuenschwander, S; Hoerstrup, S P; Baaijens, F P T; Bouten, C V C (2005). Fibrin as a cell carrier in cardiovascular tissue engineering applications. Biomaterials, 26(16):3113-3121.

Smolianski, A (2005). Finite-element/level-set/operator-splitting (FELSOS) approach for computing two-fluid unsteady flows with free moving interfaces. International Journal for Numerical Methods in Fluids, 48(3):231-269.

Börm, S; Krzebek, N; Sauter, S (2005). May the singular integrals in BEM be replaced by zero? Computer Methods in Applied Mechanics and Engineering, 194(2-5):383-393.

Heintze, S D; Zappini, G; Rousson, V (2005). Wear of ten dental restorative materials in five wear simulators-results of a round robin test. Dental Materials, 21(4):304-317.

2004

Zisch, A H; Zeisberger, S M; Ehrbar, M; Djonov, V; Weber, C C; Ziemiecki, A; Pasquale, E B; Hubbell, J A (2004). Engineered fibrin matrices for functional display of cell membrane-bound growth factor-like activities: study of angiogenic signaling by ephrin-B2. Biomaterials, 25(16):3245-3257.

2003

Chipot, M; Kinderlehrer, D; Kowalczyk, M (2003). A variational principle for molecular motors. Meccanica, 38(5):505-518.

Bohner, M; Theiss, Felix; Apelt, D; Hirsiger, W; Houriet, R; Rizzoli, G; Gnos, E; Frei, C; Auer, Jörg A; von Rechenberg, Brigitte (2003). Compositional changes of a brushite hydraulic cement after implantation in sheep. Biomaterials, 24(20):3463-3474.

Apelt, D; Theiss, Felix; El-Warrak, A O; Zlinszky, K; Bettschart-Wolfensberger, Regula; Bohner, M; Matter, S; Auer, Jörg A; von Rechenberg, Brigitte (2003). In vivo behaviour of three different injectable hydraulic calcium phosphate cements. Biomaterials, 25(7-8):1439-1451.

2001

Apholt, W; Bindl, A; Lüthy, H; Mörmann, W H (2001). Flexural strength of Cerec 2 machined and jointed InCeram-Alumina and InCeram-Zirconia bars. Dental Materials, 17(3):260-267.

De Lellis, C; Royer-Carfagni, G (2001). Interaction of fractures in tensile bars with non-local spatial dependence. Journal of Elasticity, 65(1-3):1-31 (2002).

1998

Erichsen, S (1998). Efficient automatic quadrature in 3-D Galerkin BEM. Computer Methods in Applied Mechanics and Engineering, 157(3-4):215-224.

1997

Stoll, Erich; Stern, Christian; Singer, Johannes; Stucki, Peter (1997). Doping high Tc superconductors with oxygen and metallic atoms: a molecular dynamics study. Journal of Materials Research, 12(11):2901-2906.

1995

Babuska, I; Ihlenburg, F; Paik, E; Sauter, S (1995). A generalized finite element method for solving the Helmholtz equation in two dimensions with minimal pollution. Computer Methods in Applied Mechanics and Engineering, 128(3-4):325-359.

This list was generated on Thu Jul 9 01:37:55 2020 CEST.