Header

UZH-Logo

Maintenance Infos

Browse by Scopus Subject Areas

Navigate back| Up a level
Export as
Number of items at this level: 133.

2020

Tribst, João Paulo Mendes; Dal Piva, Amanda Maria de Oliveira; Lopes, Gabriel Cirone; Borges, Alexandre Luiz Souto; Bottino, Marco Antonio; Özcan, Mutlu; de Melo, Renata Marques (2020). Biaxial flexural strength and Weilbull characteristics of adhesively luted hybrid and reinforced CAD/CAM materials to dentin: effect of self-etching ceramic primer versus hydrofluoric acid etching. Journal of Adhesion Science and Technology, 34(12):1253-1268.

Goriachko, Andrii; He, Yunbin; Knapp, Marcus; Over, Herbert; Corso, Martina; Brugger, Thomas; Berner, Simon; Osterwalder, Juerg; Greber, Thomas (2020). Correction to “Self-Assembly of a Hexagonal Boron Nitride Nanomesh on Ru(0001)”. Langmuir, 36(21):6070.

Awad, Mohamed M; Al Jeaidi, Zaid A; Almutairi, Nader; Vohra, Fahim; Özcan, Mutlu; Alrahlah, Ali (2020). Effect of self-etching ceramic primer on bond strength of zirconia-reinforced lithium silicate ceramics. Journal of Adhesion Science and Technology, 34(1):91-101.

2019

Mumcu, Emre; Erdemir, Ugur; Özsoy, Alev; Tekbas-Atay, Meltem; Özcan, Mutlu (2019). Effect of surface conditioning methods on the microtensile bond strength of repair composite to indirect restorative materials. Journal of Adhesion Science and Technology, 33(21):2369-2384.

Januário, Ana Beatriz do Nascimento; Moura, Dayanne Monielle Duarte; Araújo, Arthur Magno Medeiros de; Dal Piva, Amanda Maria de Oliveira; Özcan, Mutlu; Bottino, Marco Antonio; Souza, Rodrigo Othávio Assunção (2019). Effect of temporary cement removal methods from human dentin on zirconia-dentin adhesion. Journal of Adhesion Science and Technology, 33(19):2112-2127.

Kümbüloğlu, Övül; Yildirim, Bengisu; Al-Haj Husain, Nadin; Özcan, Mutlu (2019). Adhesion potential of relining materials to polyamide and PMMA-based denture base materials: effect of surface conditioning methods. Journal of Adhesion Science and Technology, 33(17):1939-1947.

Massi Paschoalino, Vivian; Juste Paschoalino, Bruno; Özcan, Mutlu; Luis Almeida de Carvalho, Ronaldo; de Carvalho, Rodrigo Furtado; Al-Haj Husain, Nadin; Pessoa Pereira Leite, Fabiola (2019). Effect of different air-abrasion protocols on topography, surface wettability and adhesion of MDP monomer-based resin cement to zirconia. Journal of Adhesion Science and Technology, 33(17):1948-1958.

Eyüboğlu, Tan Fırat; Olcay, Keziban; Özcan, Mutlu (2019). Effects of chemical and physico-chemical surface conditioning methods on the adhesion of resin composite to different mineral trioxide aggregate based cements. Journal of Adhesion Science and Technology, 33(16):1836-1845.

Schwendimann, Anita; Özcan, Mutlu (2019). Fatigue and fracture resistance of minimally invasive ceramic and resin composite veneers with different designs bonded adhesively to severely eroded teeth. Journal of Adhesion Science and Technology, 33(15):1715-1728.

Mangione, Elisabetta; Özcan, Mutlu (2019). Adhesion of resin cements to contaminated zirconia resin cements on zirconia: effect saliva-contamination and surface conditioning. Journal of Adhesion Science and Technology, 33(14):1572-1583.

Franz, Martin; Özcan, Mutlu (2019). Adhesion of bulk-fill resin composites as core and intraradicular post materials only versus the use of glass-fiber posts in different regions of root dentin. Journal of Adhesion Science and Technology, 33(13):1410-1425.

Atzeni, Francesco; Lanfranconi, Flavio; Aegerter, Christof M (2019). Disentangling geometrical, viscoelastic and hyperelastic effects in force-displacement relationships of folded biological tissues. European Physical Journal. E, Soft matter, 42:47.

Helbling, Fabienne; Özcan, Mutlu (2019). Adhesion of resin cement to contemporary hybrid ceramic and polymeric CAD/CAM materials: effect of conditioning methods and ageing. Journal of Adhesion Science and Technology, 33(8):886-902.

Martín-Martínez, José Miguel; Özcan, Mutlu; Sernek, Milan (2019). Editorial. Journal of Adhesion Science and Technology, 33(1):1.

Yildirim, Bengisu; Kümbüloğlu, Övül; Saraçoğlu, Ahmet; Al-Haj Husain, Nadin; Özcan, Mutlu (2019). An investigation of atomic force microscopy, surface topography and adhesion of luting cements to zirconia: effect of silica coating, zirconia primer and laser. Journal of Adhesion Science and Technology, 33(18):2047-2060.

2018

Cun, Huanyao; Seitsonen, Ari Paavo; Roth, Silvan; Decurtins, Silvio; Liu, Shi-Xia; Osterwalder, Jürg; Greber, Thomas (2018). An electron acceptor molecule in a nanomesh: F 4 TCNQ on h -BN/Rh(111). Surface Science, 678:183-188.

Meier, Margrith; Dubois, Valentin; Seeger, Stefan (2018). Reduced bacterial colonisation on surfaces coated with silicone nanostructures. Applied Surface Science, 459:505-511.

Korkut, Emre; Tulumbacı, Fatih; Gezgin, Onur; Özer, Hazal; Özcan, Mutlu (2018). Evaluation of temperature changes in the pulp chamber during polymerization of pulp capping materials. Journal of Adhesion Science and Technology, 32(20):2244-2253.

Agingu, Check; Zhang, Chang-yuan; Jiang, Neng-wu; Cheng, Hui; Özcan, Mutlu; Yu, Hao (2018). Intraoral repair of chipped or fractured veneered zirconia crowns and fixed dental prosthesis: clinical guidelines based on literature review. Journal of Adhesion Science and Technology, 32(15):1711-1723.

Lotito, Valeria; Zambelli, Tomaso (2018). Pattern Formation in Binary Colloidal Assemblies: Hidden Symmetries in a Kaleidoscope of Structures. Langmuir, 34(26):7827-7843.

Gul, Pinar; Turel, Verda; Akgul, Nilgun; Ozcan, Mutlu (2018). Comparison of the translucency of two multishaded composite resins polymerized with direct or indirect method. Journal of Adhesion Science and Technology, 32(11):1165-1175.

Ernst, Oliver; Müller, Pascal; Özcan, Mutlu (2018). Load bearing capacity of minimal invasive direct and indirect veneers bonded to maxillary incisors with severe wear: effect of preparation design and material type. Journal of Adhesion Science and Technology, 32(11):1151-1164.

Augusti, Davide; Re, Dino; Özcan, Mutlu; Augusti, Gabriele (2018). Removal of temporary cements following an immediate dentin hybridization approach: a comparison of mechanical and chemical methods for substrate cleaning. Journal of Adhesion Science and Technology, 32(7):693-704.

Bracher, Lukas; Özcan, Mutlu (2018). Adhesion of resin composite to enamel and dentin: a methodological assessment. Journal of Adhesion Science and Technology, 32(3):258-271.

Sugiyama, Yuya; Bernard, Carlo; Okuyama, Yuma; Ideta, Shin-ichiro; Tanaka, Kiyohisa; Greber, Thomas; Hirahara, Toru (2018). Flattening and manipulation of the electronic structure of h-BN/Rh(111) nanomesh upon Sn intercalation. Surface Science, 672-673:33-38.

Salzmann, Björn; Bernard, Carlo; Hemmi, Adrian; Greber, Thomas (2018). Remote doping of graphene on SiO2 with 5 keV x-rays in air. Journal of Vacuum Science & Technology A, 36(2):020603.

2017

Generali, Melanie; Kehl, Debora; Capulli, Andrew K; Parker, Kevin K; Hoerstrup, Simon P; Weber, Benedikt (2017). Comparative analysis of poly-glycolic acid-based hybrid polymer starter matrices for in vitro tissue engineering. Colloids and Surfaces. B, Biointerfaces, 158:203-212.

Toz, Tuğba; Kiremitçi, Arlin; Sera Çakmak, Anıl; Ünsal Tan, Oya; Palaska, Erhan; Gümüşderelioğlu, Menemşe; Özcan, Mutlu (2017). A comparative study on monomer elution and cytotoxicity of different adhesive restoration materials. Journal of Adhesion Science and Technology, 31(4):414-429.

Martín-Martínez, José Miguel; Sernek, Milan; Özcan, Mutlu (2017). Adhesion in numerous disciplines. Journal of Adhesion Science and Technology, 31(5):465.

Al-Dwairi, Ziad Nawaf; Aleisa, Khalil; Al-Beshr, Abdulhameed; Al-Habdan, Yazeed; Al-Harbi, Faisal; Al-Haj Husain, Nadin; Özcan, Mutlu (2017). Adhesion of cast metal alloy and lithium disilicate copings luted to different core build-up materials with self-adhesive resin cement. Journal of Adhesion Science and Technology, 31(3):242-249.

Cilingir, Aylin; Bilhan, Hakan; Cilingir, Altug; Gomec, Yavuz; Özcan, Mutlu (2017). Adhesion of conventional and self-adhesive resin cements to indirect resin composite using different surface conditioning methods. Journal of Adhesion Science and Technology, 31(4):358-368.

Rebholz-Zaribaf, Nasanin; Özcan, Mutlu (2017). Adhesion to zirconia as a function of primers/silane coupling agents, luting cement types, aging and test methods. Journal of Adhesion Science and Technology, 31(13):1408-1421.

Scholtanus, Johannes Durk; Zaia, John; Özcan, Mutlu (2017). Compressive strength and failure types of cusp replacing direct resin composite restorations in previously amalgam-filled premolars versus sound teeth. Journal of Adhesion Science and Technology, 31(2):211-218.

Koc-Dundar, Bilgin; Özcan, Mutlu (2017). Effect of clinical and laboratory contamination media on the adhesion of luting cement to direct and indirect resin composite materials. Journal of Adhesion Science and Technology, 31(11):1251-1263.

Sener-Yamaner, Işıl Damla; Sertgöz, Atilla; Toz-Akalın, Tugba; Özcan, Mutlu (2017). Effect of material and fabrication technique on marginal fit and fracture resistance of adhesively luted inlays made of CAD/CAM ceramics and hybrid materials. Journal of Adhesion Science and Technology, 31(1):55-70.

Spadacini, Alessandro; Barabanti, Nicola; Baldi, Francesco; Özcan, Mutlu; Cerutti, Antonio (2017). Effect of shade and thermo-mechanical viscosity stimulation methods on the rheological properties of nanohybrid resin composite. Journal of Adhesion Science and Technology, 31(1):100-108.

Sener-Yamaner, Isıl Damla; Ekici, Bülent; Sertgöz, Atilla; Yuzbasioglu, Emir; Özcan, Mutlu (2017). Finite element analysis on the optimal material choice and cavity design parameters for MOD inlays exposed to different force vectors and magnitudes. Journal of Adhesion Science and Technology, 31(1):8-20.

El-Askary, Farid Sabry; Botros, Sara Adel; Nassif, Mohamed Salah Abdelaziz; Özcan, Mutlu (2017). Flexural strength of nano-hybrid resin composite as a function of light attenuation distance and specimen dimension. Journal of Adhesion Science and Technology, 31(5):520-529.

El-Askary, Farid Sabry; Salah, Maha; Anwar, Mohammed Nasser; Özcan, Mutlu (2017). Immediate and delayed repair bond strength of a new ormocer resin restorative material as a function of mechanical and chemical surface conditioning methods. Journal of Adhesion Science and Technology, 31(3):310-326.

Peker, Sertac; Giray, Figen Eren; Durmus, Basak; Bekiroglu, Nural; Kargül, Betül; Özcan, Mutlu (2017). Microleakage in class V cavities prepared using conventional method versus Er:YAG laser restored with glass ionomer cement or resin composite. Journal of Adhesion Science and Technology, 31(5):509-519.

2016

Dilber, Erhan; Aglarcı, Cahide; Akın, Mehmet; Özcan, Mutlu (2016). Adhesion of metal brackets to glassy matrix and hybrid CAD/CAM materials after different physico-chemical surface conditioning. Journal of Adhesion Science and Technology, 30(15):1700-1709.

Yuzbasioglu, Emir; Sayar-Torun, Gülşilay; Özcan, Mutlu (2016). Adhesion of orthodontic brackets to indirect laboratory-processed resin composite as a function of surface conditioning methods and artificial aging. Journal of Adhesion Science and Technology, 30(23):2565-2572.

Müller, Nicolas; Schmidlin, Patrick; Özcan, Mutlu (2016). Adhesive durability of bone cements containing gentamicin or gentamicin/clindamycin-based antibiotics on titanium used for oral implants. Journal of Adhesion Science and Technology, 30(19):2130-2145.

Özcan, Mutlu; Sadiku, Merita (2016). Analysis of structural, morphological alterations, wettability characteristics and adhesion to enamel after various surface conditioning methods. Journal of Adhesion Science and Technology, 30(22):2453-2465.

Cun, Huanyao; Spescha, Annina; Schuler, Adrian; Hengsberger, Matthias; Osterwalder, Jürg; Greber, Thomas (2016). Characterization of a cold cathode Penning ion source for the implantation of noble gases beneath 2D monolayers on metals: Ions and neutrals. Journal of Vacuum Science & Technology A, 34(2):020602.

Özsoy, Alev; Kuşdemir, Mahmut; Öztürk-Bozkurt, Funda; Toz Akalın, Tuğba; Özcan, Mutlu (2016). Clinical performance of indirect composite onlays and overlays: 2-year follow up. Journal of Adhesion Science and Technology, 30(16):1808-1818.

de Carvalho, Rodrigo Furtado; Özcan, Mutlu; Louzada, Frederico; Monteiro, Evelyn; Bottino, Marco Antonio; de Melo, Renata Marques; Valandro, Luiz Felipe (2016). Comparison of methanol/hydrochloric, ferric chloride acid versus tribochemical silica coating for adhesion of resin cement to zirconium dioxide. Journal of Adhesion Science and Technology, 30(24):2690-2698.

Özcan, Mutlu; Yetkiner, Enver (2016). Could readily silanized silica particles substitute silica coating and silanization in conditioning zirconium dioxide for resin adhesion? Journal of Adhesion Science and Technology, 30(2):186-193.

Nembrini, Erica; Acquaviva, Pier Antonio; Zubani, Andrea; Queiroz, José Renato Cavalcanti; Cerutti, Antonio; Özcan, Mutlu (2016). Degree of conversion and adhesion of methacrylate-based resin cements with phosphonic or phosphoric acid acrylate to glass fiber posts at different regions of intraradicular dentin. Journal of Adhesion Science and Technology, 30(3):328-337.

Kusdemir, Mahmut; Çetin, Ali Rıza; Özsoy, Alev; Toz, Tuğba; Öztürk-Bozkurt, Funda; Özcan, Mutlu (2016). Does 2% chlorhexidine digluconate cavity disinfectant or sodium fluoride/hydroxyethyl methacrylate affect adhesion of universal adhesive to dentin? Journal of Adhesion Science and Technology, 30(1):13-23.

Cengiz, Seda; Koçak, Sibel; Koçak, Murat; Velioğlu, Neslin; Sadettinoğlu, Koray; Özcan, Mutlu (2016). Effect of Er,Cr:YSGG laser surface conditioning on the adhesion of fiber- reinforced composite and zirconia intraradicular posts to the root dentin. Journal of Adhesion Science and Technology, 30(18):1957-1967.

Corazza, Pedro Henrique; de Carvalho, Rodrigo Furtado; de Assunção e Souza, Rodrigo Othávio; Bottino, Marco Antonio; Özcan, Mutlu (2016). Effect of aging type and aged unit on the repair strength of resin composite to feldspathic porcelain in testing microtensile bond strength. Journal of Adhesion Science and Technology, 30(4):434-442.

Moharam, Lamiaa Mohmoud; Botros, Sara Adel; El-Askary, Farid Sabry; Özcan, Mutlu (2016). Effect of polymerization protocol on the degree of conversion of photo- and dual-polymerized self-etch adhesives. Journal of Adhesion Science and Technology, 30(3):262-274.

Lima, Adriano Fonseca; de Vicente Leiteb, Thatiana; Palialol, Alan Muniz; Catelan, Anderson; Aguiar, Flávio Henrique Baggio; Marchi, Giselle Maria; Yuzbasioglu, Emir; Özcan, Mutlu (2016). Effect of surface conditioning methods, adhesive systems and resin composite on repair strength of dimethacrylate and silorane resin composites. Journal of Adhesion Science and Technology, 30(24):2736-2744.

Rippe, Marília Pivetta; Wandscher, Vinícius Felipe; Bergoli, César Dalmolin; Baldissara, Paolo; Özcan, Mutlu; Valandro, Luiz Felipe (2016). Effect of the frequency of mechanical pulses for fatigue aging testing on push-out bond strength between glass fiber posts and root dentin. Journal of Adhesion Science and Technology, 30(11):1243-1252.

Sukuroglu, Elcin; Aktas, Guliz; Askın, Kerem; Queiroz, José Renato Cavalcanti; Özcan, Mutlu (2016). Effect of timing for core preparation, luting cement type and root level on adhesion of fiber posts to intraradicular dentin. Journal of Adhesion Science and Technology, 30(6):633-641.

Pozzobon, João Luiz; Missau, Taiane; Druck, Carolina Ceolin; Özcan, Mutlu; Valandro, Luiz Felipe (2016). Effects of different particle deposition parameters on adhesion of resin cement to zirconium dioxide and phase transformation. Journal of Adhesion Science and Technology, 30(4):412-421.

Seitsonen, Ari Paavo (2016). Electronic structure of reconstructed Au(111) studied with density functional theory. Surface Science, 643:150-155.

Jabłonowska, Elżbieta; Nazaruk, Ewa; Matyszewska, Dorota; Speziale, Chiara; Mezzenga, Raffaele; Landau, Ehud M; Bilewicz, Renata (2016). Interactions of Lipidic Cubic Phase Nanoparticles with Lipid Membranes. Langmuir, 32(37):9640-9648.

Öztürk-Bozkurt, Funda; Toz-Akalin, Tugba; Gözetici, Burcu; Kusdemir, Mahmut; Özsoy, Alev; Gozukara-Bağ, Harika; Özcan, Mutlu (2016). Load-bearing capacity and failure types of premolars restored with sonic activated bulk-fill-, nano-hybrid and silorane-based resin restorative materials. Journal of Adhesion Science and Technology, 30(17):1880-1890.

Eyüboğlu, Tan Fırat; Türkün, Murat; Erdilek, Necdet; Özcan, Mutlu (2016). Long-term microleakage trends in access cavities conditioned with phosphoric acid and deproteinizing agent for root-canal-treated teeth: an investigation of fluid filtration and microscopy analysis. Journal of Adhesion Science and Technology, 30(14):1574-1584.

Sarıdağ, Serkan; Helvacıoğlu-Yiğit, Dilek; Özcan, Mutlu; Avcu, Egemen; Kızıltaş, Güllü (2016). Micro-computerized tomography analysis of cement voids and pull-out strength of glass fiber posts luted with self-adhesive and glass-ionomer cements in the root canal. Journal of Adhesion Science and Technology, 30(14):1585-1595.

Lotito, Valeria; Zambelli, Tomaso (2016). Self-assembly of single-sized and binary colloidal particles at air/water interface by surface confinement and water discharge. Langmuir, 32(37):9582-9590.

2015

Gökçe, Bülent; Çötert, Hamit Serdar; Özcan, Mutlu (2015). A study of compressive strength between zirconia framework and veneering ceramic as a function of thermal expansion coefficient using Shell–Nielsen test method. Journal of Adhesion Science and Technology, 29(18):1924-1936.

Cun, Huanyao; Iannuzzi, Marcella; Hemmi, Adrian; Osterwalder, Jürg; Greber, Thomas (2015). Ar implantation beneath graphene on Ru(0001): Nanotents and “can-opener” effect. Surface Science, 634:95-102.

Aleandri, Simone; Bandera, Davide; Mezzenga, Raffaele; Landau, Ehud (2015). Biotinylated cubosomes: a versatile tool for active targeting and codelivery of paclitaxel and a fluorescein-based lipid dye. Langmuir, 31(46):12770-12776.

Aleandri, Simone; Speziale, Chiara; Mezzenga, Raffaele; Landau, Ehud (2015). Design of light-triggered lyotropic liquid crystal mesophases and their application as molecular switches in "on demand" release. Langmuir, 31(25):6981-6987.

Aykut-Yetkiner, Arzu; Candan, Umit; Ersin, Nazan; Eronat, Cemal; Belli, Sema; Özcan, Mutlu (2015). Effect of 2% chlorhexidine gluconate cavity disinfectant on microtensile bond strength of tooth-coloured restorative materials to sound and caries-affected dentin. Journal of Adhesion Science and Technology, 29(12):1169-1177.

Özcan, Mutlu; Lamperti, Sofia (2015). Effect of mechanical and air-particle cleansing protocols of provisional cement on immediate dentin sealing layer and subsequent adhesion of resin composite cement. Journal of Adhesion Science and Technology, 29(24):2731-2743.

Rajendran, Prayanka; Kaufmann, Silvan; Vörös, János; Zenobi-Wong, Marcy; Demkó, László (2015). Femtomolar oligonucleotide detection by a one-step gold nanoparticle-based assay. Colloids and Surfaces. B, Biointerfaces, 135:193-200.

Nazaruk, Ewa; Miszta, Przemysław; Filipek, Sławomir; Górecka, Ewa; Landau, Ehud; Bilewicz, Renata (2015). Lyotropic cubic phases for drug delivery: diffusion and sustained release from the mesophase evaluated by electrochemical methods. Langmuir, 31(46):12753-12761.

Isert, Nathan; Maret, Georg; Aegerter, Christof M (2015). Studying foam dynamics in levitated, dry and wet foams using diffusing wave spectroscopy. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 473:40-45.

2014

Artus, Georg R J; Bigler, Laurent; Seeger, Stefan (2014). Superficial dopants allow growth of silicone nanofilaments on hydroxyl-free substrates. Langmuir, 30(34):10308-10316.

Artus, Georg R J; Seeger, Stefan (2014). One-dimensional silicone nanofilaments. Advances in colloid and interface science, 209:144-162.

Simona, Benjamin R; Brunisholz, René A; Morhard, Robert; Hunziker, Peter; Vörös, János (2014). Coagulation at the blood-electrode interface: the role of electrochemical desorption and degradation of fibrinogen. Langmuir, 30(24):7227-7234.

Simona, Benjamin R; Brunisholz, René A; Morhard, Robert; Hunziker, Peter; Vörös, János (2014). Coagulation at the blood–electrode interface: The role of electrochemical desorption and degradation of fibrinogen. Langmuir, 30(24):7227-7234.

Özcan, Mutlu; De Araujo Michida, Silvia M; Sipahi, Cumhur; Souza, Rodrigo O A; Lombardo, Geraldo; Takahashi, Fernando E; Nascente, P (2014). Comparison of Physicochemical Surface Conditioning Methods for Adhesion of bis-GMA Resin Cement to Particulate Filler Composite and Surface Characterization. Journal of Adhesion, 90(7):569-584.

Özcan, M; Koc-Dundar, B (2014). Composite–composite adhesion in dentistry: a systematic review and meta-analysis. Journal of Adhesion Science and Technology, 28(21):2209-2229.

Matyszewska, Dorota; Sek, Slawomir; Jabłonowska, Elżbieta; Pałys, Barbara; Pawlowski, Jan; Bilewicz, Renata; Konrad, Fabian; Osornio, Yazmin M; Landau, Ehud M (2014). Dependence of Interfacial Film Organization on Lipid Molecular Structure. Langmuir, 30(38):11329-11339.

Nazaruk, Ewa; Szlęzak, Monika; Górecka, Ewa; Bilewicz, Renata; Osornio, Yazmin M; Uebelhart, Peter; Landau, Ehud M (2014). Design and Assembly of pH-Sensitive Lipidic Cubic Phase Matrices for Drug Release. Langmuir, 30(5):1383-1390.

Dermutz, Harald; Grüter, Raphael R; Truong, Anh Minh; Demkó, László; Vörös, János; Zambelli, Tomaso (2014). Local polymer replacement for neuron patterning and in situ neurite guidance. Langmuir, 30(23):7037-7046.

Hemmi, Adrian; Cun, Huanyao; Roth, Silvan; Osterwalder, Jürg; Greber, Thomas (2014). Low cost photoelectron yield setup for surface process monitoring. Journal of Vacuum Science & Technology A, 32(2):023202.

Zahn, Raphael; Vörös, János; Zambelli, Tomaso (2014). Tuning the electrochemical swelling of polyelectrolyte multilayers toward nanoactuation. Langmuir, 30(40):12057-12066.

2013

Isert, N; Maret, G; Aegerter, C M (2013). Coarsening dynamics of three-dimensional levitated foams: From wet to dry. European Physical Journal. E, Soft matter, 36(10):116.

Leite, Fabiola Pessoa; Özcan, Mutlu; Valandro, Luiz Felipe; Cunha Moreira, Carlos Heitor; Amaral, Regina; Bottino, Marco Antonio; Kimpara, Estevao Tomomitsu (2013). Effect of the Etching Duration and Ultrasonic Cleaning on Microtensile Bond Strength Between Feldspathic Ceramic and Resin Cement. Journal of Adhesion, 89(3):159-173.

Baumann, Lukas; Hegemann, Dirk; de Courten, Damien; Wolf, Martin; Rossi, René M; Meier, Wolfgang P; Scherer, Lukas J (2013). Tuning the resistance of polycarbonate membranes by plasma-induced graft surface modification. Applied Surface Science, 268:450-457.

2012

Kara, Abdelkader; Enriquez, Hanna; Seitsonen, Ari P; Voon, L C Lew Yan; Vizzini, Sebastien; Aufray, Bernard; Oughaddou, Hamid (2012). Corrigendum to: A review on silicene - New candidate for electronics. Surface Science Reports, 67(5):141.

Hofmann, Jan Philipp; Rohrlack, Stefan F; Hess, Franziska; Goritzka, Jan C; Krause, Philipp P T; Seitsonen, Ari P; Moritz, Wolfgang; Over, Herbert (2012). Adsorption of chlorine on Ru(0001)-A combined density functional theory and quantitative low energy electron diffraction study. Surface Science, 606(3-4):297-304.

Kara, Abdelkader; Enriquez, Hanna; Seitsonen, Ari P; Voon, L C Lew Yan; Vizzini, Sebastien; Aufray, Bernard; Oughaddou, Hamid (2012). A review on silicene - New candidate for electronics. Surface Science Reports, 67(1):1-18.

Hahn, Konstanze R; Tricoli, Antonio; Santarossa, Gianluca; Vargas, Angelo; Baiker, Alfons (2012). First Principles Analysis of H2O Adsorption on the (110) Surfaces of SnO2, TiO2 and Their Solid Solutions. Langmuir, 28(2):1646-1656.

Artus, Georg R J; Zimmermann, Jan; Reifler, Felix A; Brewer, Stuart A; Seeger, Stefan (2012). A superoleophobic textile repellent towards impacting drops of alkanes. Applied Surface Science, 258(8):3835-3840.

Özcan, Mutlu; Dündar, Mine; Erhan Çömlekoğlu, M (2012). Adhesion concepts in dentistry: tooth and material aspects. Journal of Adhesion Science and Technology, 26(24):2661-2681.

Ma, Haifeng; Ding, Yun; Iannuzzi, Marcella; Brugger, Thomas; Berner, Simon; Hutter, Jürg; Osterwalder, Jürg; Greber, Thomas (2012). Chiral Distortion of Confined Ice Oligomers (n= 5,6). Langmuir, 28(43):15246-15250.

Hallmann, Lubica; Ulmer, Peter; Reusser, Eric; Hämmerle, Christoph H F (2012). Effect of blasting pressure, abrasive particle size and grade on phase transformation and morphological change of dental zirconia surface. Surface and Coatings Technology, 206(19-20):4293-4302.

Sipahi, Cumhur; Özcan, Mutlu; Piskin, Bülent (2012). Effect of physicochemical surface treatments on the bond strength and adhesion of porcelain denture teeth to heat-polymerized acrylic resin denture base material. The Journal of Adhesion, 88(2):200-212.

Mader, Kevin; Mokso, Rajmund; Raufaste, Christophe; Dollet, Benjamin; Santucci, Stéphane; Lambert, Jérôme; Stampanoni, Marco (2012). Quantitative 3D characterization of cellular materials: Segmentation and morphology of foam. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 415:230-238.

Hallmann, Lubica; Mehl, Albert; Sereno, Nuno; Hämmerle, Christoph H F (2012). The improvement of adhesive properties of PEEK through different pre-treatments. Applied Surface Science, 258(18):7213-7218.

2011

Iannuzzi, M; Hutter, J (2011). Comparative study of the nature of chemical bonding of corrugated graphene on Ru(0001) and Rh(111) by electronic structure calculations. Surface Science, 605(15-16):1360-1368.

Hahn, K R; Tricoli, A; Santarossa, G; Vargas, A; Baiker, A (2011). Theoretical study of the (110) surface of Sn(1) (-) (x)Ti(x)O(2) solid solutions with different distribution and content of Ti. Surface Science, 605(15-16):1476-1482.

Chimamkpam, E F C; Schweizer, T; Schilling, A; Ferreira, J M F (2011). Rapid one-step chemical synthesis of polyaniline-manganese ferrite nanocomposites without external initiator and mechanical agitation. In: Nanotech Conference & Expo 2011, Boston, Massachusetts, USA, 13 June 2011 - 16 June 2011, 527-530.

Trtik, P; Soos, M; Münch, B; Lamprou, A; Mokso, R; Stampanoni, M (2011). Quantification of a single aggregate inner porosity and pore accessibility using hard X-ray phase-contrast nanotomography. Langmuir, 27(21):12788-12791.

Bauer, C; Gartmann, N; Dieu, L Q; Zuber, N; Dolamic, I; Ramm, J H; Brühwiler, D (2011). Self-organized patterns of microparticles in polymer films. Thin Solid Films, 519(11):3674-3678.

Vargas, A; Shnitko, I; Teleki, A; Weyeneth, S; Pratsinis, S E; Baiker, A (2011). Structural dependence of the efficiency of functionalization of silica-coated FeOx magnetic nanoparticles studied by ATR-IR. Applied Surface Science, 257(7):2861-2869.

Roth, S; Greber, T; Osterwalder, J (2011). Synthesis of epitaxial graphene on rhodium from 3-pentanone. Surface Science Letters, 605(9-10):L17-L19.

Rabe, Michael; Verdes, Dorinel; Seeger, Stefan (2011). Understanding protein adsorption phenomena at solid surfaces. Advances in Colloid and Interface Science, 162(1-2):87-106.

2010

Sala, A; Ehrbar, M; Trentin, D; Schoenmakers, R G; Vörös, J; Weber, Franz E (2010). Enzyme mediated site-specific surface modification. Langmuir, 26(13):11127-11134.

Gabi, Michael; Larmagnac, Alexandre; Schulte, Petra; Vörös, János (2010). Electrically controlling cell adhesion, growth and migration. Colloids and Surfaces. B, Biointerfaces, 79(2):365-371.

Sannomiya, T; Dermutz, H; Hafner, C; Vörös, J; Dahlin, A B (2010). Electrochemistry on a localized surface plasmon resonance sensor. Langmuir, 26(10):7619-7626.

Greber, T (2010). Graphene and Hexagonal Boron Nitride Layers: Nanostructures with 3 bond hierarchy levels. e-Journal of Surface Science and Nanotechnology, 8:62-64.

Schluck, T; Aegerter, C M (2010). Photo-elastic properties of the wing imaginal disc of Drosophila. European Physical Journal E - Soft Matter and Biological Physics, 33(2):111-115.

Zahn, R; Vörös, J; Zambelli, T (2010). Swelling of electrochemically active polyelectrolyte multilayers. Current Opinion in Colloid & Interface Science, 15(6):427-434.

Weder, G; Blondiaux, N; Giazzon, M; Matthey, N; Klein, M; Pugin, R; Heinzelmann, H; Liley, M (2010). Use of force spectroscopy to investigate the adhesion of living adherent cells. Langmuir, 26(11):8180-8186.

Bürgel, S C; Guillaume-Gentil, O; Zheng, L; Vörös, J; Bally, M (2010). Zirconium ion mediated formation of liposome multilayers. Langmuir, 26(13):10995-11002.

Martoccia, D; Pauli, S A; Brugger, T; Greber, T; Patterson, B D; Willmott, P R (2010). h-BN on Rh(1 1 1): Persistence of a commensurate 13-on-12 superstructure up to high temperatures. Surface Science, 604(5-6):L9-L11.

Martoccia, D; Brugger, T; Björck, M; Schlepütz, C M; Pauli, S A; Greber, T; Patterson, B D; Willmott, P R (2010). h-BN/Ru(0 0 0 1) nanomesh: A 14-on-13 superstructure with 3.5 nm periodicity. Surface Science, 604(5-6):L16-L19.

2009

Füchslin, R M; Maeke, T; McCaskill, J S (2009). Spatially resolved simulations of membrane reactions and dynamics: Multipolar reaction DPD. European Physical Journal E - Soft Matter and Biological Physics, 29(4):431-448.

Aegerter, C M; Maret, G (2009). Coherent backscattering and Anderson localization of light. Progress in Optics, 52:1-62.

Greber, T; Corso, M; Osterwalder, J (2009). Fermi surfaces of single layer dielectrics on transition metals. Surface Science, 603(10-12):1373-1377.

Isert, N; Maass, C C; Aegerter, C M (2009). Influence of gravity on a granular Maxwell’s demon experiment. European Physical Journal E - Soft Matter and Biological Physics, 28(2):205-210.

Spadaro, E N (2009). Uniform energy and density distribution: diblock copolymers' functional. Interfaces and Free Boundaries, 11(3):447-474.

2008

Rieger, Marc Oliver (2008). Higher dimensional problems with volume constraints— Existence and Gamma-convergence. Interfaces and Free Boundaries, 10(2):155-172.

Pérez-Dieste, V; Tamai, A; Greber, T; Chiuzbaian, S G; Patthey, L (2008). Charge-transfer dynamics in one-dimensional C60 chains. Surface Science, 602(11):1928-1932.

Ernst, K H (2008). Amplification of chirality in two-dimensional molecular lattices. Current Opinion in Colloid & Interface Science, 13(1-2):54-59.

Zimmermann, J; Rabe, M; Verdes, D; Seeger, S (2008). Functionalized silicone nanofilaments: a novel material for selective protein enrichment. Langmuir, 24(3):1053-1057.

Treier, M; Ruffieux, P; Schillinger, R; Greber, T; Müllen, K; Fasel, R (2008). Living on the edge: A nanographene molecule adsorbed across gold step edges. Surface Science, 602(13):L84-L88.

Wattendorf, U; Coullerez, G; Vörös, J; Textor, M; Merkle, H P (2008). Mannose-based molecular patterns on stealth microspheres for receptor-specific targeting of human antigen-presenting cells. Langmuir, 24(20):11790-11802.

Zimmermann, J; Artus, G R J; Seeger, S (2008). Superhydrophobic silicone nanofilament coatings. Journal of Adhesion Science and Technology, 22(3-4):251-263.

Grieshaber, D; Vörös, J; Zambelli, T; Ball, V; Schaaf, P; Voegel, J C; Boulmedais, F (2008). Swelling and contraction of ferrocyanide-containing polyelectrolyte multilayers upon application of an electric potential. Langmuir, 249(23):13668-13676.

2007

Gnauck, Mandy; Jaehne, Evelin; Blaettler, Thomas; Tosatti, Samuele; Textor, Marcus; Adler, Hans-Juergen P (2007). Carboxy-terminated oligo(ethylene glycol)-alkane phosphate: synthesis and self-assembly on titanium oxide surfaces. Langmuir, 23(2):377-381.

Huwiler, Christoph; Kunzler, Tobias P; Textor, Marcus; Vörös, Janos; Spencer, Nicholas D (2007). Functionalizable nanomorphology gradients via colloidal self-assembly. Langmuir, 23(11):5929-5935.

Thid, Dorota; Bally, Marta; Holm, Karin; Chessari, Salvatore; Tosatti, Samuele; Textor, Marcus; Gold, Julie (2007). Issues of ligand accessibility and mobility in initial cell attachment. Langmuir, 23(23):11693-11704.

2004

Pussi, K; Lindroos, M; Katainen, J; Habermehl-Cwirzen, K; Lahtinen, J; Seitsonen, A P (2004). The (√7 × √7)R19.1°-C6H6 adsorption structure on Co{0001}: a combined tensor LEED and DFT study. Surface Science, 572(1):1-10.

2001

Chipot, M (2001). On the continuity of the free boundary in some class of two-dimensional problems. Interfaces and Free Boundaries, 3(1):81-99.

This list was generated on Tue May 18 02:07:20 2021 CEST.